Hello, on the following vidtut I have the following questions.
1 - How to select all keyframe to smooth on Windows? On Mac you mention Command 8
2 - How to Zoom in/out on Windows
https://www.youtube.com/watch?v=YmvuDZWZpDw
Thank you.
Animation Editor video
Hi bkiter!
1. you probably understood that wrong, it is Command+A (not eight) on the Mac, Control+A on Windows (you can also find it in the 'Edit' menu)
2. i assume you want to zoom in/out in the timeline.
you can drag the handles on both sides of the sliders inwards to zoom in, see image below: Hope that helps...
Regards
Christoph
1. you probably understood that wrong, it is Command+A (not eight) on the Mac, Control+A on Windows (you can also find it in the 'Edit' menu)
2. i assume you want to zoom in/out in the timeline.
you can drag the handles on both sides of the sliders inwards to zoom in, see image below: Hope that helps...
Regards
Christoph
Hello,
been following the tutorial, https://www.youtube.com/watch?v=YmvuDZWZpDw
I have set my Magic Keyframe to 50.00/s but the transitions are a little fast, how can I make them more slow?
Thanks!
been following the tutorial, https://www.youtube.com/watch?v=YmvuDZWZpDw
I have set my Magic Keyframe to 50.00/s but the transitions are a little fast, how can I make them more slow?
Thanks!
Hi!
The value next to 'Magic Keyframe' in the Animation Editor (50.00°/s) means, that keyframes are generated so that the animation moves at a speed of 50 degrees per second. Lower values result in a slower animation.
So - try lower numbers and generate a few magic keyframes for testing, until you find a speed you like....
Regards,
Christoph
The value next to 'Magic Keyframe' in the Animation Editor (50.00°/s) means, that keyframes are generated so that the animation moves at a speed of 50 degrees per second. Lower values result in a slower animation.
So - try lower numbers and generate a few magic keyframes for testing, until you find a speed you like....
Regards,
Christoph
Thank you Christoph!
Another question, I been following the tutorial video. Im using 3 panos with transitions, but when save as video, the video files only last 10 seconds and only shows 1 pano, I have also done another test, same settings and when saved as video would only las 13 seconds, showing Pano 1 and Pano 3 but it does not show the Pano 2 , after those results, I save again (without modifying or changing anything) and the video would again be for 10 seconds and only showing Pano 1.
Thanks
Another question, I been following the tutorial video. Im using 3 panos with transitions, but when save as video, the video files only last 10 seconds and only shows 1 pano, I have also done another test, same settings and when saved as video would only las 13 seconds, showing Pano 1 and Pano 3 but it does not show the Pano 2 , after those results, I save again (without modifying or changing anything) and the video would again be for 10 seconds and only showing Pano 1.
Thanks
- Hopki
- Gnome
- Posts: 13066
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi bkiter,
This sounds very odd.
Is it possible you can make a similar project using the attached images, say using three nodes, they are very small files and my test files.
You can then upload the project with the images if you can reproduce so I can see what is going on.
Regards,
Hopki
This sounds very odd.
Is it possible you can make a similar project using the attached images, say using three nodes, they are very small files and my test files.
You can then upload the project with the images if you can reproduce so I can see what is going on.
Regards,
Hopki
- Attachments
-
- test_images.zip
- (52.98 KiB) Downloaded 163 times
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hello Hopki,
sorry for my late reply but I was swamp with work. I just made a test and it works now.
I think that the previous video animation was not working correctly because I was using .tiff files, now Im using .jpegs and is working correctly.
Regards,
sorry for my late reply but I was swamp with work. I just made a test and it works now.
I think that the previous video animation was not working correctly because I was using .tiff files, now Im using .jpegs and is working correctly.
Regards,
Hopki wrote: ↑Mon Feb 13, 2017 10:39 pm Hi bkiter,
This sounds very odd.
Is it possible you can make a similar project using the attached images, say using three nodes, they are very small files and my test files.
You can then upload the project with the images if you can reproduce so I can see what is going on.
Regards,
Hopki
- Hopki
- Gnome
- Posts: 13066
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi bkiter,
Would still like to see a project as this should work with all input image file types.
Regards,
Hopki
Would still like to see a project as this should work with all input image file types.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hello, the Animator is working properly now but I need the 360 video to be saved as a 360 mp4 with the Animation projections included, so I can upload to YouTube or FB, so it would show moving with the animation and the user can move around the 360 / interactive.
Is it possible?
Thank you!
Is it possible?
Thank you!
- Hopki
- Gnome
- Posts: 13066
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi bkiter,
The output from the animation editor is a non interactive mp4 video you produce from your 360 video.
You can add projection changes etc, etc.
If you want to publish an interactive 360 video with projection changes then yes use the animation editor but export as an HTML5 project. The video will play, it will be interactive but then you can then use the animation with projection changes as auto rotate.
Regards,
Hopki
The output from the animation editor is a non interactive mp4 video you produce from your 360 video.
You can add projection changes etc, etc.
If you want to publish an interactive 360 video with projection changes then yes use the animation editor but export as an HTML5 project. The video will play, it will be interactive but then you can then use the animation with projection changes as auto rotate.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/