p2vr 7.0.5 and multiple floorplans
Posted: Fri Nov 24, 2023 2:12 pm
Hi all,
i have a strange problem with floorplans...
I add the first floorplan, it works perfect.
Then i add a second floorplan. Both floorplans show the picture from plan 2, and the pins are from plan 2 in both cases too.
I have to delete both floorplans, go back to p2vr 6.1.15, and add both floorplans. Go again to 7.0.5, re-edit everything that has been new in 7.0.5, rebuild the tour, and the both floorplans work as they should.
Plan 1 shows picture one and the pind from plan 1,
plan 2 shows picture 2 and the pins from plan 2.
What is going wrong?
The tour can be seen here...
http://360.haifischbar.de/panoramen/bei ... it_debug=1
the floorplans can be shown lower left corner.
..it is still on work...
greetings from germany
Chris
i have a strange problem with floorplans...
I add the first floorplan, it works perfect.
Then i add a second floorplan. Both floorplans show the picture from plan 2, and the pins are from plan 2 in both cases too.
I have to delete both floorplans, go back to p2vr 6.1.15, and add both floorplans. Go again to 7.0.5, re-edit everything that has been new in 7.0.5, rebuild the tour, and the both floorplans work as they should.
Plan 1 shows picture one and the pind from plan 1,
plan 2 shows picture 2 and the pins from plan 2.
What is going wrong?
The tour can be seen here...
http://360.haifischbar.de/panoramen/bei ... it_debug=1
the floorplans can be shown lower left corner.
..it is still on work...
greetings from germany
Chris