"Little bug" with Pano2VR Beta and "marterial_dart" and individual icon?
Posted: Thu Dec 01, 2022 2:16 pm
Moin zusammen.
Gibt es evtl. teilweise einen kleinen "Bug" mit "Eigenschaften - Punkthotspot" > "Bilddatei"?
Oder bin ich nur mal wieder etwas zu dämlich.....!?
(nutze aktuell Beta 7.0.5 und auch Beta 7.0.6)
Wenn ich "marterial_dart" (oder auch "material_dusk", "material_index", "feather_box") als Skin nutze, als Typ "Info" und als SKIN-ID "ht_info", dann wird mir in der Vorschau zwar das selbst hinzugefügte Bild als Icon angezeigt, aber in der Ausgabe dann leider nicht. Da wird mir dann immer das Standard-Icon angezeigt.
Wenn ich in "marterial_dart" z.B. den "Typ" ändere, ändert sich leider auch nichts.
Wenn ich in "marterial_dart" z.B. aber die "SKIN-ID" (z.B. auf "ht_pdf") ändere, ändert sich auch die Bilddatei wie gewünscht.
Nutze ich als Skin z.B "feather_orb" oder "neto" funktioniert die Darstellung der Bilddatei mit oben beschriebenen Einstellungen wie sie soll.
(weiter Skins hab ich aktuell nicht getestet)
Ist das ein "Bug"
Lässt der sich schnell beheben im "Original-Standard-Skin" (würd gern zwei betroffene Projekte veröffentlichen)?
Oder ist die individuelle Bilddatei als Icon-Ersatz gar nicht in allen Skins gewünscht?
Über jede Hilfe/Antwort bin ich glücklich und bedanke mich schon im voraus!
Anbei noch ein paar Sccreenshots (mit "marterial_dart").
_____________________
Translated with Mate (App & SafariExtension):
Hello together.
Is there possibly a small "bug" with "Properties - Point hotspot" > "Image file"?
Or am I just being stupid again!?
(currently using Beta 7.0.5 and also Beta 7.0.6)
If I use "marterial_dart" (or also "material_dusk", "material_index", "feather_box") as skin, as type "Info" and as SKIN ID "ht_info ", then the self-added image is displayed as an icon in the preview, but unfortunately not in the output. The standard icon is then always displayed to me.
If I change the "type" in "marterial_dart", for example, unfortunately nothing changes either.
But if I change the "SKIN-ID" (e.g. to "ht_pdf") in "marterial_dart" e.g., the image file also changes as desired.
If I use "feather_orb" or "neto" as a skin, for example, the display of the image file works as it should with the settings described above.
(I haven't tested any other skins at the moment)
Is that a "bug"?
Can it be fixed quickly in the original standard-skin (I'd like to publish two affected projects)?
Or is the individual Image file as an icon replacement not wanted in all skins?
I am happy about every help/answer and thank you in advance!
Attached are a few screenshots (with "marterial_dart").
Gibt es evtl. teilweise einen kleinen "Bug" mit "Eigenschaften - Punkthotspot" > "Bilddatei"?
Oder bin ich nur mal wieder etwas zu dämlich.....!?
(nutze aktuell Beta 7.0.5 und auch Beta 7.0.6)
Wenn ich "marterial_dart" (oder auch "material_dusk", "material_index", "feather_box") als Skin nutze, als Typ "Info" und als SKIN-ID "ht_info", dann wird mir in der Vorschau zwar das selbst hinzugefügte Bild als Icon angezeigt, aber in der Ausgabe dann leider nicht. Da wird mir dann immer das Standard-Icon angezeigt.
Wenn ich in "marterial_dart" z.B. den "Typ" ändere, ändert sich leider auch nichts.
Wenn ich in "marterial_dart" z.B. aber die "SKIN-ID" (z.B. auf "ht_pdf") ändere, ändert sich auch die Bilddatei wie gewünscht.
Nutze ich als Skin z.B "feather_orb" oder "neto" funktioniert die Darstellung der Bilddatei mit oben beschriebenen Einstellungen wie sie soll.
(weiter Skins hab ich aktuell nicht getestet)
Ist das ein "Bug"
Lässt der sich schnell beheben im "Original-Standard-Skin" (würd gern zwei betroffene Projekte veröffentlichen)?
Oder ist die individuelle Bilddatei als Icon-Ersatz gar nicht in allen Skins gewünscht?
Über jede Hilfe/Antwort bin ich glücklich und bedanke mich schon im voraus!
Anbei noch ein paar Sccreenshots (mit "marterial_dart").
_____________________
Translated with Mate (App & SafariExtension):
Hello together.
Is there possibly a small "bug" with "Properties - Point hotspot" > "Image file"?
Or am I just being stupid again!?
(currently using Beta 7.0.5 and also Beta 7.0.6)
If I use "marterial_dart" (or also "material_dusk", "material_index", "feather_box") as skin, as type "Info" and as SKIN ID "ht_info ", then the self-added image is displayed as an icon in the preview, but unfortunately not in the output. The standard icon is then always displayed to me.
If I change the "type" in "marterial_dart", for example, unfortunately nothing changes either.
But if I change the "SKIN-ID" (e.g. to "ht_pdf") in "marterial_dart" e.g., the image file also changes as desired.
If I use "feather_orb" or "neto" as a skin, for example, the display of the image file works as it should with the settings described above.
(I haven't tested any other skins at the moment)
Is that a "bug"?
Can it be fixed quickly in the original standard-skin (I'd like to publish two affected projects)?
Or is the individual Image file as an icon replacement not wanted in all skins?
I am happy about every help/answer and thank you in advance!
Attached are a few screenshots (with "marterial_dart").