open a tour within the tour

[the_b]

Hello,

I would like to put 8 different tours in one big 360 tour together. Is it possible?

Here is my request in detail: I did 8 different 360° tours for a holiday park. Each tour shows an vacation home with 3 to 7 panoramas. Now the plan is to have one big tour with an map of the whole holiday park. With click on the individual button of the map, you should start the tour of the chosen house.
Is it possible to join all tours in one respectively open all different tours whitin the starttour? Or do I have to build a new tour with several floor plans, starting complete by zero?

Thanks for helping and all the best.
Bert

[Hopki]

Hi Bert,
Yes, no problem.
Pano2VR has been tested with thousands of input images so this is not an issue.
You can have hotspots linking between nodes of sub-tour but to other sub-tours so again, yep this works.
You can even use Direct Node Access to open the start node of each sub-tour, so again all good.

How many panoramas/nodes are you thinking of using?

If for example, you have 2,000 panoramas then I would consider separate projects as you do not want to load all the node information to only use a few nodes.
But if in the hundreds then one project would be fine.

So to properly advise the best way forward can you share more information about your project?
Regards,

[the_b]

Hello Hopki,

always great to read from you. Thanks a lot for your fast help.
Here all existing tours (build with several versions of pano2vr and some ar older than 10 years)
- https://www.senftenberger-see.de/VT/fam ... index.html
- https://www.senftenberger-see.de/VT/fam ... index.html
- https://www.senftenberger-see.de/VT/fam ... index.html
- https://www.senftenberger-see.de/VT/vir ... index.html
- https://www.senftenberger-see.de/VT/vir ... index.html
- https://www.senftenberger-see.de/VT/vir ... index.html
- https://www.senftenberger-see.de/VT/vir ... index.html
- https://www.senftenberger-see.de/VT/vir ... app_u.html
- https://www.senftenberger-see.de/VT/vir ... app_o.html
- https://www.senftenberger-see.de/VT/vir ... index.html
- as well the streetview tour: https://goo.gl/maps/dWuaEUt9HB2j2QWp7

All these different tours should starting within a single big tour. It would be great to have an menu with the name of the different houses, where you open the existing tours. The same with the map file I attached.

Lageplan_Familienpark_DIN_A4.png (314.67 KiB) Viewed 3563 times

There should be hotspots, which are linked to the existing tours as well.
This all should work for desktop and mobile devices.

Is this possible or just a big wish?

Thanks for helping and best regards!
Bert

[k.ary.n]

You have the original project files, right? If so, you can combine all the tours into a single tour. Open one project and then right-click in the Tour Browser and choose "Add Project". Add as many projects as you like. Then add your add your map to that project.