I might have done something silly or I'm just missing something.
I have imported panoramas AND flat images into a project (the ones in the red area are panoramas, the rest are flat images)
![Image](https://scontent.fman4-1.fna.fbcdn.net/v/t39.30808-6/398589353_10226930452181219_6201836760009939523_n.jpg?_nc_cat=101&ccb=1-7&_nc_sid=5f2048&_nc_ohc=8yNpDlH0MsAAX_GJi-r&_nc_ht=scontent.fman4-1.fna&oh=00_AfBWzq48oE9_QHlfOinHotRZHn6cSBACwPLmQnkSp7V13g&oe=6553DAF4)
This allows me to use the cloner to generate one menu for panoramas and one for still images using tags
![Image](https://scontent.fman4-1.fna.fbcdn.net/v/t39.30808-6/398499329_10226930452701232_1645325572422454418_n.jpg?_nc_cat=107&ccb=1-7&_nc_sid=5f2048&_nc_ohc=gu6nsvHlC9MAX_6fS4b&_nc_ht=scontent.fman4-1.fna&oh=00_AfBezvYrrYYQ3hBkilrmCVqcfKQa8IWc5_FbCcKjn69PcQ&oe=65541F45)
So I have my pano thumbnail menu
![Image](https://scontent.fman4-1.fna.fbcdn.net/v/t39.30808-6/398493370_10226930453101242_23820150338319595_n.jpg?_nc_cat=100&ccb=1-7&_nc_sid=5f2048&_nc_ohc=EGZ0dAQnpusAX-vFsf5&_nc_ht=scontent.fman4-1.fna&oh=00_AfDKFlltR9zuMpoZnKvnQbwcSHhBmH6ddXVlHJM6ssdJzQ&oe=65537AD6)
which works fine.
The map works fine with all images and panos shown
![Image](https://scontent.fman4-1.fna.fbcdn.net/v/t39.30808-6/398486894_10226930453701257_5158381139368267206_n.jpg?_nc_cat=102&ccb=1-7&_nc_sid=5f2048&_nc_ohc=3EQmjVZmFssAX-dM-xb&_nc_ht=scontent.fman4-1.fna&oh=00_AfAza6_exilDtrOAO1Pjv7oDRo94bsRcrFSJAmGlKwffIA&oe=65535896)
and the still image menu
![Image](https://scontent.fman4-2.fna.fbcdn.net/v/t39.30808-6/398489900_10226930454821285_4058695145888646597_n.jpg?_nc_cat=103&ccb=1-7&_nc_sid=5f2048&_nc_ohc=ZGTCWBxyE4MAX88lss5&_nc_ht=scontent.fman4-2.fna&oh=00_AfD-yvGm0qD6cawQjkKIWZEzt6Ffi83cg207GcX0PVTRVg&oe=65524B06)
shows everything fine.
The problem is - how do I now open a flat image from the map pin or the still image menu in an overlay?? I've got an image popup defined in the skin and I can see it popping up when I choose a flat image from the menu but I've been struggling to get the image to actually show in an overlay.
![Image](https://scontent.fman4-1.fna.fbcdn.net/v/t39.30808-6/398471524_10226930455701307_4824727906755349378_n.jpg?_nc_cat=101&ccb=1-7&_nc_sid=5f2048&_nc_ohc=49YYUnBKH3cAX-R5mGR&_nc_ht=scontent.fman4-1.fna&oh=00_AfC1H1soXzLQXFnahv9mF5DmXTRlqlUsd3flcWPqy5NEwg&oe=65534C78)
Using a "Open Next Panorama" action (which I guess is designed for - well - panoramas and not flat images) opens the flat image in the "main panorama" area and not in an image popup.
Is there any way to define a target for a flat image node?
Or can I not really use a mix of pano and flat in the way I set it up??