Loading a 11,737 by 8592/16 image as Cylindrical, horizontal FOV is 360 (vertical is about 133). Leaving all settings pretty much as default, both QT and Flash output failing. QT produces a 4.5 k mov file, flash is 42.6 K. Cylinder height is set at 2233 in both.
This same file works in Pano2QTVR 1.6.6.
Any ideas, would prefer to use output from Pano2VR ultimately. Also plan on eventually making this a 720 degree cylinder as I have two sets of this showing the same view with slight before and after changes.
Regards and happy holidays!
Robert
Pano2VR 2.2.4 and Cylindricals?
-
Robert Harshman
- Posts: 75
- Joined: Thu Nov 30, 2006 5:53 pm
- Location: Chicago/Austin TX
- Contact:
-
erik leeman
- Posts: 470
- Joined: Sat Sep 09, 2006 10:51 am
- Contact:
Hi Robert,
I have the same problem, Thomas capped the max cubeface size of the last versions of Pano2VR to 2880x2880px because of a (possible?) Flash9 limitation. If I remember correctly version 2.0 beta3 worked fine, then Pano2VR became unusable for high res cylindricals. Let's hope Thomas will change his mind, and 'repairs' this limitation, because those v2.0 beta3 panos I made from 25.276x2.575 images have been working just fine all this time.
Cheers,
Erik Leeman
I have the same problem, Thomas capped the max cubeface size of the last versions of Pano2VR to 2880x2880px because of a (possible?) Flash9 limitation. If I remember correctly version 2.0 beta3 worked fine, then Pano2VR became unusable for high res cylindricals. Let's hope Thomas will change his mind, and 'repairs' this limitation, because those v2.0 beta3 panos I made from 25.276x2.575 images have been working just fine all this time.
Cheers,
Erik Leeman
-
Robert Harshman
- Posts: 75
- Joined: Thu Nov 30, 2006 5:53 pm
- Location: Chicago/Austin TX
- Contact:
Thanks Erik,
Thomas, any input on if this is a feature or .....
Regards,
Robert
Thomas, any input on if this is a feature or .....
Regards,
Robert