If I have understood everything correctly a tour starts directly in the "Oculus Rift" when I click the "Enter VR" button in the browser.
For this I have to install the VR glasses and allow the VR display in the browser.
Unfortunately this does not work with me.
When I click the "Enter VR" button in firefox, the "Oculus Rift" starts and tries to load Firefox. In this "loading" state the glasses get stuck.
I also tried to install "firefox reality". The program is not found by the "Oculus Rift" software.
Can someone tell me what I'm doing wrong or how I can watch a tour with the "Oculus Rift" software?
Martin
WebVR with oculus rift
- Hopki
- Gnome
- Posts: 13026
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Martin,
Make sure you have. He led for updates under the help menu in Pano2VR.
Then once Pano2VR is full up to date please test again.
Regards,
Make sure you have. He led for updates under the help menu in Pano2VR.
Then once Pano2VR is full up to date please test again.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi Hopki, I have a similar problem.
I have P2VR v 6.1.9 pro. I have re-built the tours with Simplexv6 but my Oculus Go headset does not show the VR version of the tour.
http://360bizphotos.co.uk/tours/woodside/index.html
Hamish
I have P2VR v 6.1.9 pro. I have re-built the tours with Simplexv6 but my Oculus Go headset does not show the VR version of the tour.
http://360bizphotos.co.uk/tours/woodside/index.html
Hamish
- Hopki
- Gnome
- Posts: 13026
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
I tested the Oculus Quest this morning and now with the Go, I was using our example: https://ggnome.com/samples/pano2vr_6/melbourne/
Does the example work for you?
Regards,
I tested the Oculus Quest this morning and now with the Go, I was using our example: https://ggnome.com/samples/pano2vr_6/melbourne/
Does the example work for you?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi, the Melbourne sample worked OK.
I have deleted the entire project and re created with the same results. All I get is the side by side view as per the screenshot attached (taken from my phone when the oculus was casting to it).
Hamish
I have deleted the entire project and re created with the same results. All I get is the side by side view as per the screenshot attached (taken from my phone when the oculus was casting to it).
Hamish
- Attachments
-
- Screenshot_20200811-095535_Oculus.jpg (723.8 KiB) Viewed 3775 times
- Hopki
- Gnome
- Posts: 13026
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
This has come up in support as well.
Testing with Pano2VR 6.1.9 with a new project it is all working as should with the Oculus Go and Quest.
Now I suspect there is something odd going on with hardware.
One customer says it's not working with the Oculus Quest, they sent me their output and testing it works fine for me on said device, now asking to see proof!
No problem as it is working, but make sure your devices are up to date.
But just to clarify iOS 13.6, Android 10, Oculus Go and Oculus Quest all running OK.
Regards,
This has come up in support as well.
Testing with Pano2VR 6.1.9 with a new project it is all working as should with the Oculus Go and Quest.
Now I suspect there is something odd going on with hardware.
One customer says it's not working with the Oculus Quest, they sent me their output and testing it works fine for me on said device, now asking to see proof!
No problem as it is working, but make sure your devices are up to date.
But just to clarify iOS 13.6, Android 10, Oculus Go and Oculus Quest all running OK.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13026
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Hamish,
Just spotted your URL, you need a secure connection, so https:// otherwise the gyro will not work and you will end up with a fixed image at an odd angle.
Regards,
Just spotted your URL, you need a secure connection, so https:// otherwise the gyro will not work and you will end up with a fixed image at an odd angle.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Thank you very much for the answers.
I have followed all suggestions:
This happens on our tour:
https://ache-stallmeier.de/virtual-tour ... r_Test_01/
and on the "Melbourn Tour" of Hopki
Does anyone have any other ideas?
Martin
I have followed all suggestions:
- The last update of Pano2Vr is installed.
- Graphics card drivers updated.
- We use a secure connection
This happens on our tour:
https://ache-stallmeier.de/virtual-tour ... r_Test_01/
and on the "Melbourn Tour" of Hopki
Does anyone have any other ideas?
Martin
- Hopki
- Gnome
- Posts: 13026
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Martin,
If you are using an Oculus device then use the oculus browser.
Does it then work?
Regards,
If you are using an Oculus device then use the oculus browser.
Does it then work?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi Martin,
i have now opened "firefox" via the "oculus browser" and then started the tour.
The result is the same.
As soon as I "press" the Enter VR button, a message appears that firefox is loaded. In this state the browser freezes.
But maybe you mean another way to open Urls with the "oculus browser"?
Can I access websites directly (without opening firefox) in the oculus browser?
Martin
i have now opened "firefox" via the "oculus browser" and then started the tour.
The result is the same.
As soon as I "press" the Enter VR button, a message appears that firefox is loaded. In this state the browser freezes.
But maybe you mean another way to open Urls with the "oculus browser"?
Can I access websites directly (without opening firefox) in the oculus browser?
Martin