Hi All
Ok I have a button I would like to act in a set way and do not seem to be able to make it work.
Normal is a dark shade
Mouse over is a lighter shade
Selected is red
When I mouse over the button it turns to the lighter shade.
When I press the button (or click) it turns red. The problem is that it does not stay red as I would like.
I have several numbers referring to levels and would like the user to know what level they have selected.
So what am I missing?
Image Buttons
- Hopki
- Gnome
- Posts: 13028
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
You missing nothing, this is how the three states of the button works.
What you need to do is have two stacked images, one being a button image that has the Normal and Mouse over states the second image which is the selected/mouse click state.
You would stack them so the selected button image is under the button with the two states.
On mouse click you just hide the top, two state button leaving the selected state image showing.
Regards,
Hopki
You missing nothing, this is how the three states of the button works.
What you need to do is have two stacked images, one being a button image that has the Normal and Mouse over states the second image which is the selected/mouse click state.
You would stack them so the selected button image is under the button with the two states.
On mouse click you just hide the top, two state button leaving the selected state image showing.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Thank you for your response. Put me back on the right track.
I wanted to turn the number back to the original colour when another floor was selected. Which I did by just adding another action node change show element _self.
Still on a vertical learning curve!
I wanted to turn the number back to the original colour when another floor was selected. Which I did by just adding another action node change show element _self.
Still on a vertical learning curve!
If it looks impossible you just have not found the right angle to view it from.