Thomas, I loaded up Beta 3 on the Mac and it is doing something strange.
On a Machine that had Beta 2
OSX 10.5.2
Open Object2vr
Open "LightTable"
set it to 20 frames.
put in the 20 frames. Cool Fixes!!!
Hit OK
Tell it to make a flash file.
Set compression to 75%
name the file for output.
Uncheck open after done. That always opens illustrator.
Take the file from the desktop and drop it in a browser window.
Now Here is where it went wrong. The file has 20 images and the end swf has 40 with a black screen between every from.
Thoughts?????
http://www.photospherix.com/flash_clien ... ewobjectvr
Beta 3 on the mac
-
- Posts: 314
- Joined: Wed Oct 22, 2008 9:45 pm
- Location: Beech Grove
- Contact:
-
- Posts: 314
- Joined: Wed Oct 22, 2008 9:45 pm
- Location: Beech Grove
- Contact:
I got to reply to my own post. I do not know what I did on the other post, but I know I did it more than once and could repeat it, but now everything is working. I even played with the hotspot generator.
THREE BEERS FOR THOMAS!!!!!!!!!!!!!!!!!!!!!!
http://www.photospherix.com/flash_clien ... wobjectvr2
THREE BEERS FOR THOMAS!!!!!!!!!!!!!!!!!!!!!!
http://www.photospherix.com/flash_clien ... wobjectvr2
I do have the same problem.PhotoSpherix wrote:I got to reply to my own post. I do not know what I did on the other post, but I know I did it more than once and could repeat it, but now everything is working. I even played with the hotspot generator.
THREE BEERS FOR THOMAS!!!!!!!!!!!!!!!!!!!!!!
http://www.photospherix.com/flash_clien ... wobjectvr2
I loaded a sequence of 62 frames and after rendering it ends up with a qtvr (or flash-file too) with a black frame on every second image. help?
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi
Something is happening when you add the images then save the file, that’s when you get the black frames.
If you save the project BEFORE you add your images all works.
Try it, I would be interested in your results as I am a PC user not Mac.
Regards
Hopki
Something is happening when you add the images then save the file, that’s when you get the black frames.
If you save the project BEFORE you add your images all works.
Try it, I would be interested in your results as I am a PC user not Mac.
Regards
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Thank you very much for your help, Hopki!Hopki wrote:Hi
Something is happening when you add the images then save the file, that’s when you get the black frames.
If you save the project BEFORE you add your images all works.
Try it, I would be interested in your results as I am a PC user not Mac.
Regards
Hopki
Indeed, it worked the way you described it.
This software really needs improvement, and it should satifactorily working before they sell it for 58,80€!
Fortunately I did not buy it yet ...
And yes, you're right ... I'm working on a Mac
Best regards and thanks again