about multirseolution
Posted: Thu Feb 28, 2013 10:27 am
Hello everyone,
I am using the multiresolution function by creating the flash output and I have a problem...When a pano opens and I want to see other parts of the pano, for example the ground or the ceiling, and I drag with the mouse in that direction the "tiles" do open too slowly...I don't know if the word "tile" is correct what I mean is it takes a while until the viewer can see the ground or the ceiling clearly...Yes, of course that is the logic of multiresolution, first the level with low res is downloaded and the "finer levels" after that...But on other examples cretaed with pano2vr I see that 1.) this process is faster than in my examples and 2.) the first resolution level is not black&white like in mine...Please see my example below:
http://www.bilisimfotograf.com/images/s ... nek_1.html
And in a recent thread in the galleries on another forum I saw this example -amongst others-:
http://www.dlsphoto.net/YosemiteWinter2 ... VeilFalls/
My panos in the example are 9000x4500 px...When I create the flash output I use as the cube face size 9000:3.14=2866 px...When I go to the multiresolution tab I first cerate levels automatically (3 levels) and then change the settings as;
Levels 2866; 1433 and 716
Level Tile size 716
Am I missing something?
Any answer will be greatly appreciated...
Burak
I am using the multiresolution function by creating the flash output and I have a problem...When a pano opens and I want to see other parts of the pano, for example the ground or the ceiling, and I drag with the mouse in that direction the "tiles" do open too slowly...I don't know if the word "tile" is correct what I mean is it takes a while until the viewer can see the ground or the ceiling clearly...Yes, of course that is the logic of multiresolution, first the level with low res is downloaded and the "finer levels" after that...But on other examples cretaed with pano2vr I see that 1.) this process is faster than in my examples and 2.) the first resolution level is not black&white like in mine...Please see my example below:
http://www.bilisimfotograf.com/images/s ... nek_1.html
And in a recent thread in the galleries on another forum I saw this example -amongst others-:
http://www.dlsphoto.net/YosemiteWinter2 ... VeilFalls/
My panos in the example are 9000x4500 px...When I create the flash output I use as the cube face size 9000:3.14=2866 px...When I go to the multiresolution tab I first cerate levels automatically (3 levels) and then change the settings as;
Levels 2866; 1433 and 716
Level Tile size 716
Am I missing something?
Any answer will be greatly appreciated...
Burak