720º panorama, is this possible in Pano2VR?

Q&A about the latest versions
360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 9:29 am

I would like to combine two panoramas in one 720º pano, like this example:

Can this be done in Pano2VR in both Flash and HTML5?
If it is possible than I really would like that the dissolve happens at the 180º mark.

Any thoughts out there how to do this?

Tong
Posts: 313
Joined: Fri Apr 13, 2012 9:30 pm

Re: 720º panorama, is this possible in Pano2VR?

Post by Tong » Sun Oct 07, 2012 10:02 am

yes, can be.

use $cur = current pan/tilt/fov - (use in open next panorama target field)
$cur is Current Position. Place it in the Pan/Tilt/FOV as this is your target.
Regards, Smooth
ps:
http://gardengnomesoftware.com/forum/vi ... 824#p27824

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 10:06 am

Ahh, that was the one I was looking for.
Thanx!
I'll have a shot at it.


Karel

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 10:22 am

Hmm, how do I check on the point that I want the 'open next panorama' to happen without a mouse click?

Sorry if I ask for the obvious, but I don't see it yet...


Karel

Tong
Posts: 313
Joined: Fri Apr 13, 2012 9:30 pm

Re: 720º panorama, is this possible in Pano2VR?

Post by Tong » Sun Oct 07, 2012 2:41 pm

use autoredirect to next pano

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 6:13 pm

Sorry, I do appreciate your help, but I'm feeling rather stupid now.
Auto redirect? Where can I find that?

Karel

Tong
Posts: 313
Joined: Fri Apr 13, 2012 9:30 pm

Re: 720º panorama, is this possible in Pano2VR?

Post by Tong » Sun Oct 07, 2012 6:23 pm

Image

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 6:48 pm

Hmm, it does not turn up in my settings....

Image

Tong
Posts: 313
Joined: Fri Apr 13, 2012 9:30 pm

Re: 720º panorama, is this possible in Pano2VR?

Post by Tong » Sun Oct 07, 2012 7:45 pm

you don`t use 4beta pro

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 7:49 pm

No I use the regular 4 beta.

So it is only possible in the Pro version?

DemonDuck
Posts: 111
Joined: Sun Feb 15, 2009 1:15 am

Re: 720º panorama, is this possible in Pano2VR?

Post by DemonDuck » Sun Oct 07, 2012 8:00 pm

I'd like to know how to do this also. There's been some interest by others. It is a nice thing to do to show the passage of time. For example, take on pano in the day time and then on from the same place at twilight and rotate the daylight image into the twilight image and then back again.

It's not obvious how to do that with just rotation cues. One should be able to rotate in either direction and fade into the next/previous pano at each 360 rotation. The example in the first post is exactly what I want to do. How do you do that?

A good step by step tutorial would be useful.
Last edited by DemonDuck on Sun Oct 07, 2012 8:29 pm, edited 1 time in total.

kris
Posts: 105
Joined: Wed Feb 15, 2012 9:37 am

Re: 720º panorama, is this possible in Pano2VR?

Post by kris » Sun Oct 07, 2012 8:15 pm

Hi 360vr_nl

It may not be possible to replicate exactly as krpano example. but u can use a button to switch between the two panos (in the button settings use for syncing same angle:$cur = current pan/tilt/fov as told by tong).also if its not controlled by user then auto node change is a good option to try with transitions enabled in visual tab. calculate the time required to complete 360' at the given pan speed, then set that time in change node feature.

I have downloaded the krpano sample, & what i understood is that the switching is controlled from an external XML file, so when you are dragging the mouse for every 360' the scene switches. Does anyone know if its possible to control from an swf file from external XML file in pano2vr.

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 8:49 pm

Thanks Kris,

But what I see from the screenshot of Tong, it seems that Pano2VR only can do it in a timeframe, as you said. And that is not an option for me.
I want to switch over (and back) to another panorama at a given rotation point.

So if it is not possible in the current version, let's make it an official feature request... 8)



Karel

DemonDuck
Posts: 111
Joined: Sun Feb 15, 2009 1:15 am

Re: 720º panorama, is this possible in Pano2VR?

Post by DemonDuck » Sun Oct 07, 2012 9:06 pm

360vr_nl wrote:Thanks Kris,

But what I see from the screenshot of Tong, it seems that Pano2VR only can do it in a timeframe, as you said. And that is not an option for me.
I want to switch over (and back) to another panorama at a given rotation point.
So if it is not possible in the current version, let's make it an official feature request... 8)
Karel
And why only between two panos. Why not 3 or 4 or.....???

360vr_nl
Posts: 51
Joined: Wed Apr 27, 2011 5:26 pm
Location: The Netherlands
Contact:

Re: 720º panorama, is this possible in Pano2VR?

Post by 360vr_nl » Sun Oct 07, 2012 9:36 pm

O yes, of course. 3 or 4 would be great. But in my current project I want to switch between 2.
That is why. :wink:


Karel

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 11 guests