I upgraded few weeks ago from version 3 to 4. Yesterday I tried to correct minor problem in the pano that was created in February. When I brought it to the version 4 everything looked fine until I tried to output. There were area hotspots linked to web pages that previously worked well - now links seemed not to exist at all. I checked elements multiple times, searched the web for answers, re-watched tutorials one more time and couldn't find what was wrong. Finally I decided to reinstall back Pano2Vr 3.0 and was able to output the panorama.
I compared htmls that were created with both program versions - and yes there are differences but overall all the information was there.
A good advice will be highly appreciated. It may be something silly but what?
Pano2VR 4.0
-
EMcCulloch
- Posts: 20
- Joined: Tue Jan 31, 2012 11:02 am
- Location: Woodland Hills, California, USA
-
Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Can you post images of your hotspot properties.
Regards,
Hopki
Can you post images of your hotspot properties.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
-
EMcCulloch
- Posts: 20
- Joined: Tue Jan 31, 2012 11:02 am
- Location: Woodland Hills, California, USA
Originally (version 3) I had relative links (see two last images).
Since then I used absolute ones and they didn't work either.
While outputting in P2VR 4 i changed default output directory to reflect the same set up as the previous version. Thanks
Here is the pano with linked pages:
http://www.digitalearthworks.com/portfo ... rquee.html
Since then I used absolute ones and they didn't work either.
While outputting in P2VR 4 i changed default output directory to reflect the same set up as the previous version. Thanks
- 1_areaHS_panel.jpg (73.59 KiB) Viewed 4351 times
- 2_summaryHS_absolute.jpg (103.28 KiB) Viewed 4351 times
- 3_summaryHS_relative.jpg (74.75 KiB) Viewed 4351 times
Here is the pano with linked pages:
http://www.digitalearthworks.com/portfo ... rquee.html
-
EMcCulloch
- Posts: 20
- Joined: Tue Jan 31, 2012 11:02 am
- Location: Woodland Hills, California, USA
I can't get Area Hotspots to show up and work in flash and html file. The Point Hotspot works; Area - not. The html tags, used in the Title in hotspot editor (as indicated in the Tutorial video) are being output as text - example: <b>Green</b> shows up as <b>Green</b> not Green.
I am attaching a simple test site and a panorama project I experimented with. The links are listed in the html output file but no indication on the screen that they exist. Since I am the only one having the problem I'd appreciate Panorama Gurus words of wisdom.
I am attaching a simple test site and a panorama project I experimented with. The links are listed in the html output file but no indication on the screen that they exist. Since I am the only one having the problem I'd appreciate Panorama Gurus words of wisdom.
- Attachments
-
- Test Pano2vr 4-2.zip
- Replacement file output in version beta 4-2
- (555.05 KiB) Downloaded 201 times
Last edited by EMcCulloch on Wed Sep 12, 2012 7:28 pm, edited 1 time in total.
Yes, HTML tags have been fixed in 4.0 Beta 2
Your Area Hotspots do not work with Flash output.
Tested with Quicktime output and they work.
I never use Area Hotspots so never came across this issue.
Why not use Polygon Hotspots?
Answer about Flash Area Hotspots
Will be fixed hopefully in the next Beta release. 4.0 Beta 3
Regards, Smooth
Your Area Hotspots do not work with Flash output.
Tested with Quicktime output and they work.
I never use Area Hotspots so never came across this issue.
Why not use Polygon Hotspots?
Answer about Flash Area Hotspots
Will be fixed hopefully in the next Beta release. 4.0 Beta 3
Regards, Smooth
-
EMcCulloch
- Posts: 20
- Joined: Tue Jan 31, 2012 11:02 am
- Location: Woodland Hills, California, USA
Thanks for checking.
Yes the html tags work in 4.2.
The Polygon Hotspots didn't exist in version 3. I was "quickly" editing an older project and encounter problem with the output. The tutorials still show Aerial Hotspots so they are intended to work. I wasn't sure if it was my mistake or program's. Thanks for taking the time and saving my sanity.
Yes the html tags work in 4.2.
The Polygon Hotspots didn't exist in version 3. I was "quickly" editing an older project and encounter problem with the output. The tutorials still show Aerial Hotspots so they are intended to work. I wasn't sure if it was my mistake or program's. Thanks for taking the time and saving my sanity.