I made a mistake by change the directory of the File in the Setting, because the application told me that may storage capacity getting low. So i change everything but after that its always error when generate the output.
Its says :
Source file 'C:/Users/62813/AppData/Roaming/GardenGnomeSoftware/threejs/three.min.js' not found
Source file 'C:/Users/62813/AppData/Roaming/GardenGnomeSoftware/webxr-polyfill/webxr-polyfill.min.js' not found
Just like this thread >> viewtopic.php?t=14508
I tried to foolow Hopki instruction by delete the old Webxr folder, and even generate to new folder, but no luck. Can somebody help me to solve this?
Thanks
Generate Output three.js not found
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Abbo,
If you open Pano2VR 7 and select File, Settings, then the File tab, I am assuming it is one of the paths here you have changed.
All you have to do is click on the file path, and select all the text and delete, click OK to close the Settings.
Now open it again and it will show the default path.
If your OS is telling you that you are running out of disk space then the file path you need to change is the Image Cache Location under Settings.
One of our test devices is a small Windows, Surface Go which has a 64GB SSD.
When making Gigapixel images with this we use an external USB 3.0 500GB external SSD.
All be it very slow, it is able to create the outputs OK.
Have you seen this webinar: https://ggnome.com/gg_webinars/working- ... s-pano2vr/
As a tip any of the file paths in the Settings, once deleted will open using the default settings.
Regards,
If you open Pano2VR 7 and select File, Settings, then the File tab, I am assuming it is one of the paths here you have changed.
All you have to do is click on the file path, and select all the text and delete, click OK to close the Settings.
Now open it again and it will show the default path.
If your OS is telling you that you are running out of disk space then the file path you need to change is the Image Cache Location under Settings.
One of our test devices is a small Windows, Surface Go which has a 64GB SSD.
When making Gigapixel images with this we use an external USB 3.0 500GB external SSD.
All be it very slow, it is able to create the outputs OK.
Have you seen this webinar: https://ggnome.com/gg_webinars/working- ... s-pano2vr/
As a tip any of the file paths in the Settings, once deleted will open using the default settings.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/