pano2vr7 - set fov

[Marcus]

Hi,

Can I please get some guidance on how to set the min & max Fov on v7? When I press the 'set' button, the gui completely ignores the number I've entered and changes to a different one. I've obviously misunderstood how the gui works here.

Many thanks
Marc

[Hopki]

Hi Marc,
This sounds a bit odd.
Can you describe how you are setting the FoV and where you are viewing the panorama, for example in the viewer or in the output?
Regards,

[Marcus]

Hi Hopki,

I've added a few images to help describe the issue. I highlight the node and, in the 'Viewing Parameters' tab, the details underneath the 'Field of View (Zoom)' accordion are changed.

E.g.
fov-min-before.jpg - typed in 60 into the Min field
fov-min-after.jpg - view immediately after pressing 'set'. Value jumped to 113.15

fov-max-before.jpg - used up arrow to select 80
fov-max-after.jpg - view immediately after pressing 'set'. Value jumped to 15.51

I get different values, depending on the value I 'set'.

btw. the default view fov for this node = 113.15 . There is only one node in this project.

Many thanks
Marc

[Marcus]

Through the GUI, I could not set the min / max Fov to anything sensible, making the tour unusable. However, I was delighted to see the *.p2vr file is XML, so I was able to make the necessary fov changes there, which the GUI used on it's re-start.

So I now have a temporary workaround.

[Hopki]

Hi Marc,
It's a bug and added to the bug tracker.
Thanks for the heads up.
Regards,