Hi,
Can I please get some guidance on how to set the min & max Fov on v7? When I press the 'set' button, the gui completely ignores the number I've entered and changes to a different one. I've obviously misunderstood how the gui works here.
Many thanks
Marc
pano2vr7 - set fov
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Marc,
This sounds a bit odd.
Can you describe how you are setting the FoV and where you are viewing the panorama, for example in the viewer or in the output?
Regards,
This sounds a bit odd.
Can you describe how you are setting the FoV and where you are viewing the panorama, for example in the viewer or in the output?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi Hopki,
I've added a few images to help describe the issue. I highlight the node and, in the 'Viewing Parameters' tab, the details underneath the 'Field of View (Zoom)' accordion are changed.
E.g.
fov-min-before.jpg - typed in 60 into the Min field
fov-min-after.jpg - view immediately after pressing 'set'. Value jumped to 113.15
fov-max-before.jpg - used up arrow to select 80
fov-max-after.jpg - view immediately after pressing 'set'. Value jumped to 15.51
I get different values, depending on the value I 'set'.
btw. the default view fov for this node = 113.15 . There is only one node in this project.
Many thanks
Marc
I've added a few images to help describe the issue. I highlight the node and, in the 'Viewing Parameters' tab, the details underneath the 'Field of View (Zoom)' accordion are changed.
E.g.
fov-min-before.jpg - typed in 60 into the Min field
fov-min-after.jpg - view immediately after pressing 'set'. Value jumped to 113.15
fov-max-before.jpg - used up arrow to select 80
fov-max-after.jpg - view immediately after pressing 'set'. Value jumped to 15.51
I get different values, depending on the value I 'set'.
btw. the default view fov for this node = 113.15 . There is only one node in this project.
Many thanks
Marc
- Attachments
-
- fov-min-before.jpg (29.84 KiB) Viewed 751 times
-
- fov-min-after.jpg (36.48 KiB) Viewed 751 times
-
- fov-max-before.jpg (31.18 KiB) Viewed 751 times
-
- fov-max-after.jpg (38.81 KiB) Viewed 751 times
Through the GUI, I could not set the min / max Fov to anything sensible, making the tour unusable. However, I was delighted to see the *.p2vr file is XML, so I was able to make the necessary fov changes there, which the GUI used on it's re-start.
So I now have a temporary workaround.
So I now have a temporary workaround.
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Marc,
It's a bug and added to the bug tracker.
Thanks for the heads up.
Regards,
It's a bug and added to the bug tracker.
Thanks for the heads up.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/