Hi Hopki,
Thank you for the sample file, which works fine on my system. I have created another sample from scratch which does also work as expected. So, not sure what is causing the previous attempt to fail, because they are setup identical, will do some more fault finding/testing.
Many thanks
Pano2VR 7 beta
Hi Hopki
I keep coming up against this isue, have searched this thread and can see 2 other similar posts but with no solution.
I add a pano and choose web output, and output project and it loads in browser fine BUT if I make changes like change skin, or pretty much anything in the Control section like adding menu link or inverting mouse wheel I then go to re-output and it gives a error message box saying 1 errors occurred during build and show details displays "Cannot write to file D:/temp/sunset/output". I have plenty of space on that drive. From this point I cannot recover and have to scrap the file and start again which is getting annoying. The one constant seems to be that on first choosing web output it works and shows Output Folder as 'output' as expected, but when making changes it then loses the output folder (see screenshot) - manually setting the folder back to Output does not always fix the issue.
Really hoping to start using 7 for live projects as it's otherwise great, but this issue is driving me a little nuts was wondering when there would be another update to 7?
Cheers,
Dylan.
I keep coming up against this isue, have searched this thread and can see 2 other similar posts but with no solution.
I add a pano and choose web output, and output project and it loads in browser fine BUT if I make changes like change skin, or pretty much anything in the Control section like adding menu link or inverting mouse wheel I then go to re-output and it gives a error message box saying 1 errors occurred during build and show details displays "Cannot write to file D:/temp/sunset/output". I have plenty of space on that drive. From this point I cannot recover and have to scrap the file and start again which is getting annoying. The one constant seems to be that on first choosing web output it works and shows Output Folder as 'output' as expected, but when making changes it then loses the output folder (see screenshot) - manually setting the folder back to Output does not always fix the issue.
Really hoping to start using 7 for live projects as it's otherwise great, but this issue is driving me a little nuts was wondering when there would be another update to 7?
Cheers,
Dylan.
- Hopki
- Gnome
- Posts: 13005
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Chris,
Please send in to support with this information.
We can then look at your account.
Regards,
Please send in to support with this information.
We can then look at your account.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
When is Pano2VR 7 going to finally be able to convert cubes and cube strips etc to equirectangular correctly?
This has been a reported issue since the beta 7 first came out and it still does not convert properly.
This is "panorama 101" type functionality and the fact that it has been broken for so long without being addressed frankly boggles the mind. All of this worked in v6.
EDIT: Latest 7b5 update appears to have now fixed this. Hallelujah! Thank you
This has been a reported issue since the beta 7 first came out and it still does not convert properly.
This is "panorama 101" type functionality and the fact that it has been broken for so long without being addressed frankly boggles the mind. All of this worked in v6.
EDIT: Latest 7b5 update appears to have now fixed this. Hallelujah! Thank you
Last edited by mbb on Tue Nov 01, 2022 8:28 am, edited 1 time in total.
Good morning.
Lately Pano2VR keeps freezing, freezing constantly. If I delete a tour or a Google street view node, it freezes and I have to force exit the program. Other times, it closes while I'm working.
I must say that I have the latest update 7.0Beta 4
All my best,
Javier
Hello.
I was working on a project and as I mentioned in this previous message, Pano2VR closed unexpectedly. Now I cannot open the project. What should I do?
I updated Pano2VR 7.0Beta 5 2 days ago.
Lately Pano2VR keeps freezing, freezing constantly. If I delete a tour or a Google street view node, it freezes and I have to force exit the program. Other times, it closes while I'm working.
I must say that I have the latest update 7.0Beta 4
All my best,
Javier
Hello.
I was working on a project and as I mentioned in this previous message, Pano2VR closed unexpectedly. Now I cannot open the project. What should I do?
I updated Pano2VR 7.0Beta 5 2 days ago.
Last edited by Javier B on Fri Oct 21, 2022 1:08 pm, edited 1 time in total.
Quick question and sorry if been answered before.
I have couple of projects and I want to update them using V7 features. Do I need to start from scratch or is it safe to just open the old p2vr project file in V7 and carry on?
Cheers,
Dylan.
I have couple of projects and I want to update them using V7 features. Do I need to start from scratch or is it safe to just open the old p2vr project file in V7 and carry on?
Cheers,
Dylan.
- Hopki
- Gnome
- Posts: 13005
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Chris,
Can you e-mail support?
Regards,
Can you e-mail support?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi Hopki. Last 2 times in this thread that I have posted, the reply from you has been has been "Hi Chris" and can I contact support. Not sure if these responses have been aimed at me and if so, puzzled as why you've called me Chris
Thanks,
Dylan
- Hopki
- Gnome
- Posts: 13005
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Dylan,
Sorry, my bad.
I would make a copy of the project file and skin to be on the safe side then use these.
Regards,
Sorry, my bad.
I would make a copy of the project file and skin to be on the safe side then use these.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13005
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi jonathan,
Log in to your website account, do you see both a Pano2VR 6 pro and Pano2VR 7 keys?
If not content support, link below.
Regards,
Log in to your website account, do you see both a Pano2VR 6 pro and Pano2VR 7 keys?
If not content support, link below.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi, I am having the same issue, has this got a solution?dylan wrote: ↑Mon Oct 17, 2022 8:08 pm Hi Hopki
I keep coming up against this isue, have searched this thread and can see 2 other similar posts but with no solution.
I add a pano and choose web output, and output project and it loads in browser fine BUT if I make changes like change skin, or pretty much anything in the Control section like adding menu link or inverting mouse wheel I then go to re-output and it gives a error message box saying 1 errors occurred during build and show details displays "Cannot write to file D:/temp/sunset/output". I have plenty of space on that drive. From this point I cannot recover and have to scrap the file and start again which is getting annoying. The one constant seems to be that on first choosing web output it works and shows Output Folder as 'output' as expected, but when making changes it then loses the output folder (see screenshot) - manually setting the folder back to Output does not always fix the issue.
Really hoping to start using 7 for live projects as it's otherwise great, but this issue is driving me a little nuts was wondering when there would be another update to 7?
Cheers,
Dylan.
Found it. Reason was that it appears that the "default" folder is not saved into the project file, then I left the field empty and set manually the folder in the outup setting and now no error.
---> HOWEVER I now get the following wierd error:
Error loading panorama XML
The pano.xml file is not saved/generated into the output folder. Why?
SOLVED: also the output filename had to be set manually
Thank you
Piero
Bergamo - Italy
Visit my Web site: https://www.pieroannoni.com
Virtual tour web gallery: https://www.pieroannoni.com/gbp
Pano2vr v7b6 Arm64
Hotspot Preview node images (the smallest "alt" versions) created by Pano2vr skin element are now either "blurry" or super compressed (hard to tell which). Both for JPEG and PNG. This is a new problem with the latest beta. Currently using "spherical" previews, but changing projection doesn't matter.
Example image-
Hotspot Preview node images (the smallest "alt" versions) created by Pano2vr skin element are now either "blurry" or super compressed (hard to tell which). Both for JPEG and PNG. This is a new problem with the latest beta. Currently using "spherical" previews, but changing projection doesn't matter.
Example image-
Bug report: Changing the Input Video File with Pano2VR version 7.0 beta6 64bit doesn't seem to work.
In the editor it shows the changed filename, but when exporting the pano.xml, it uses the video filename that was there when the project was first loaded.
When clearing the Input Video File field, it will export the pano.xml correctly, but when assigning a video again, it will export with the old filename again.
In the editor it shows the changed filename, but when exporting the pano.xml, it uses the video filename that was there when the project was first loaded.
When clearing the Input Video File field, it will export the pano.xml correctly, but when assigning a video again, it will export with the old filename again.
Ruud van Reenen
3DV - Real estate artist impressions and animations
VR Tourviewer - Experience Pano2VR tours on Oculus Go, Quest, Rift, Pico and Cardboard VR headsets
3DV - Real estate artist impressions and animations
VR Tourviewer - Experience Pano2VR tours on Oculus Go, Quest, Rift, Pico and Cardboard VR headsets