Pano2VR 7 beta

Q&A about the latest versions
User avatar
k.ary.n
Gnome
Posts: 615
Joined: Wed Aug 15, 2007 1:02 pm

You can add grid lines in the Viewer in the viewer settings (since v6, but now if you press and hold on that button, you can set the number of steps and color of the grid).
Attachments
grid.png
grid.png (2.24 MiB) Viewed 789597 times
panolli
Posts: 5
Joined: Tue Jan 19, 2021 11:43 am
Location: Germany

a similar request: would it be possible to change the color / thickness of the center marker?
In darker pictures it is difficult to see it.
User avatar
CStüben
Posts: 146
Joined: Mon Apr 24, 2017 6:00 pm
Location: Wuppertal, Germany
Contact:

Hello Karyn,
ah, yes, i see. After some searching i found the switch that shows the toolbar. Never seen the toolbar before ;-)

Thank you!

Chris



added: and my 6.1.15 can set grid width and color too.
Last edited by CStüben on Thu Jun 23, 2022 9:58 am, edited 1 time in total.
---
Die Welt ist eine runde Scheibe.
User avatar
CStüben
Posts: 146
Joined: Mon Apr 24, 2017 6:00 pm
Location: Wuppertal, Germany
Contact:

Hi all,
because p2vr7 is no longer running on my macintosh, i meanwhile installed it on a virtual machine running under vmware fusion.

First attempt... no success. After installation at first run, it asked for license key. Entered it, but main window stayed completely white. Restarted the virtual machine, same result.

Second attempt... installed on a another virtual machine with different video settings... SUCCESS! main window shows all that it should show.

The video settings of the machine that diddnt success:

vm1.jpeg
vm1.jpeg (104.12 KiB) Viewed 789581 times

The machine that works:

vm2.jpeg
vm2.jpeg (129.58 KiB) Viewed 789581 times

Is it really the direct x and / or the opengl and / or 3d acceleration that does the difference between no success / success? Or must i search elsewhere?

Greetings from gemany
Chris
---
Die Welt ist eine runde Scheibe.
User avatar
Hopki
Gnome
Posts: 12999
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi Chris,
Can you say what exactly happens when you try to install Pano2VR 7 beta 4a on your Mac?
Also, can you say what Mac you have?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
User avatar
dylan
Posts: 34
Joined: Mon Jun 29, 2020 10:22 am
Location: Surrey, UK
Contact:

Hi all

Sorry if this has been mentioned before, I did look around the forum.

I am using the feather_orb skin and 2 of my tour panos have pinned web elements (YT videos pinned on TV's). When navigating around in the final output the pinned video briefly appears as a large box during the transition between panos and it's quite jarring. This only happens when 'Zoom In' is chosen as transition effect. Is there a way of preventing this happening?
I've captured the behaviour here: https://youtu.be/chCLxxHx7mk

Thanks,
Dylan.

Extra details:

Panorama Tour Builder
Version: 7.0 beta 4a 64bit
Revision: 19550/6.2.4
Build date: Jun 10 2022, 15:35:21


OpenGL:
NVIDIA Corporation
NVIDIA GeForce RTX 3060/PCIe/SSE2
User avatar
Hopki
Gnome
Posts: 12999
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi dylan,
Thank you for taking the time to report the issue.
Can we confirm, do you have effects turned on in the transition, for example, zoon in before.
If you just have cross dissolve do you still see it?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
User avatar
dylan
Posts: 34
Joined: Mon Jun 29, 2020 10:22 am
Location: Surrey, UK
Contact:

Hi Hopki
I can confirm that using just cross dissolve or other effects is fine, the issue only arises when using the zoom effect.
Other than that, am loving V7.
Cheers,
Dylan
User avatar
Hopki
Gnome
Posts: 12999
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Thanks Dylan.
Cheers,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
360media
Posts: 8
Joined: Thu Jun 21, 2018 11:17 pm
Location: Germany

DVS3D wrote: Sat Apr 16, 2022 2:03 pm Hello! I have seen that if you use two monitors and move the screen to the other monitor the context and options menus stay on the other screen
Hi,
same problem here.
I have 3 Monitors.
Only when the Pano2VR Window is on the left monitor, the menus are shown correctly.
When I move the Window to the middle or right monitor, the menus are displayed on the left monitor. Doesn't matter if fullscreen or not.
Last week the menus were sometimes shown on the right monitor.

Regards
User avatar
Hopki
Gnome
Posts: 12999
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi 360media,
Thanks for reporting and the description.
For a long time, we were not able to reproduce the issue.
Can we confirm, how are you connecting the monitors, HDMI or USB C?
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
360media
Posts: 8
Joined: Thu Jun 21, 2018 11:17 pm
Location: Germany

Hi Hopki,

all Monitors have HDMI

Monitor 1: HDMI to HDMI
Monitor 2: Display Port to HDMI
Monitor 3: Display Port to HDMI
Graphic Card: ASUS NVIDIA GeForce RTX 3060

Regards
PaulB
Posts: 17
Joined: Tue Mar 30, 2021 4:07 pm

Can I add a feature requests/change to version 7. Put the Output properties back into a separate window or just under/within the output panel.
Don't have them toggle with the other pano properties windows depending what you last clicked on. Totally frustrating to have them disappear, just because you clicked in the main workspace window.

Also when docking Windows at the bottom of the workspace, eg Tour Browser and Animation panel together, can the the tabs just be at the top of that section, there's no reason to have the tabs at the bottom and repeat the title at the top? Waste of vertical space on the interface... just have them act like normal tabs at the top of the group.
Screenshot 2022-10-12 at 15.51.08.jpg
Screenshot 2022-10-12 at 15.51.08.jpg (52.17 KiB) Viewed 788777 times
PaulB
Posts: 17
Joined: Tue Mar 30, 2021 4:07 pm

Found what I think might be a bug with custom properties... or maybe they don't work the way I think they should?

Steps:
- Created 2 custom properties as text properties, one for entry of a building name, one to add a room name.
Screenshot 2022-10-13 at 16.17.34.png
Screenshot 2022-10-13 at 16.17.34.png (38.22 KiB) Viewed 788744 times
- Added a text box into the skin and added those 2 custom variables into the text entry
Screenshot 2022-10-14 at 14.48.49.png
Screenshot 2022-10-14 at 14.48.49.png (61.92 KiB) Viewed 788744 times
- Added a logic block to define if the building property is empty then just enter the room name only
Screenshot 2022-10-14 at 14.49.25.png
Screenshot 2022-10-14 at 14.49.25.png (391.53 KiB) Viewed 788744 times
- Applied this skin to tour with about 8 panoramas

The first tour node has both entries filled with text and shows correctly.
Screenshot 2022-10-14 at 14.52.19.png
Screenshot 2022-10-14 at 14.52.19.png (244.52 KiB) Viewed 788744 times
The second tour node only has the room name entry filled, building name property left blank.
On output no text shows at all on this second panorama.
Screenshot 2022-10-14 at 14.52.30.png
Screenshot 2022-10-14 at 14.52.30.png (217.77 KiB) Viewed 788744 times
Not quite sure what I did wrong or if its a bug?
User avatar
Hopki
Gnome
Posts: 12999
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi,
I can not reproduce this using Pano2VR 7 beta 4a.
Please see my test, doe sit work for you?
If so can you post or send your Support Package to support, link below.
Regards,
Attachments
test.zip
(24.29 KiB) Downloaded 8931 times
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Post Reply