P2VR 6.1.4 Pro, Windows 10
Importing Panotour project does not import any of the panoramas. Only node names, hotspots etc.
Here's a segment of the .kpt file showing panorama image info (btw- images are indeed located where path shows they are)-
------------------------------------
<pano objectId="4880" hFov="360" vFov="180" planar="false" dontGenerateTiles="true" minFov="1" tourDirectory="azcm36_4880" x="0" maxFov="90" startYaw="4.8" startPitch="0" startFov="75" maxPixelZoom="true" type="1" heading="85.20000000000107" phi="0" y="372" lowres="true">
<description name="Defense to Development" backgroundColor="#ffffff" foregroundColor="#000000" backgroundAlpha="255" foregroundAlpha="255">
<filename name="panoramas/azcm36/sides-orig/azcm36_f.tif"/>
<filename name="panoramas/azcm36/sides-orig/azcm36_r.tif"/>
<filename name="panoramas/azcm36/sides-orig/azcm36_b.tif"/>
<filename name="panoramas/azcm36/sides-orig/azcm36_l.tif"/>
<filename name="panoramas/azcm36/sides-orig/azcm36_u.tif"/>
<filename name="panoramas/azcm36/sides-orig/azcm36_d.tif"/>
</description>
......<snip>.....
------------------------------------------
Here's the section of P2VR project file that has the above panorama. Note how there is no pano image info
------------------------------------------
<panorama>
<input>
<patch/>
</input>
<viewingparameter>
<pan>
<start>0</start>
</pan>
<tilt>
<start>0</start>
</tilt>
<fov>
<start>75</start>
<min>1</min>
<max>90</max>
</fov>
<flyinstart/>
<pannorth>35.8</pannorth>
</viewingparameter>
<userdata>
<title>Defense to Development</title>
<tags>First_Floor</tags>
</userdata>
<floorplans/>
<hotspots>
<hotspot>
<position>
<pan>107.339</pan>
<tilt>-2.25378</tilt>
<fov>10</fov>
</position>
<next>
<pan>0</pan>
<tilt>0</tilt>
<fov>0</fov>
</next>
<polygon/>
<type>point</type>
<id>Point01</id>
<title>$(ut)</title>
<linktype>node</linktype>
<linksubtype>unknown</linksubtype>
<url>{node8}</url>
<target>-65.1/-0.7/70.0</target>
<distance>0</distance>
<distanceauto>1</distanceauto>
<autoplace>0</autoplace>
<use3d>0</use3d>
<width>0</width>
<height>0</height>
</hotspot>
Panotour Import does not import images.
- Hopki
- Gnome
- Posts: 13004
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Thanks for taking the time to report this, I will forward it on to Thomas.
Regards,
Thanks for taking the time to report this, I will forward it on to Thomas.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13004
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hummm,
Interesting, I just tested with a KTP file and this opens with all nodes, floor plans and hotspots?
Maybe you can send your project in for us to look at.
The KPT file and folder with all your images.
Please send a link to download it to the e-mail address below.
Regards,
Interesting, I just tested with a KTP file and this opens with all nodes, floor plans and hotspots?
Maybe you can send your project in for us to look at.
The KPT file and folder with all your images.
Please send a link to download it to the e-mail address below.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Can't send the tour with all it's files as it has over 65 high resolution panoramas.
Is there another way I can help you debug this?
Note- are you using TIF cube faces like my example?
Also- the tour and it's files are on a network drive, which *shouldn't* matter, but you never know?
EDIT: A smaller Panotour I have (on same network drive) with smaller equirectangular jpeg source panos imported fine. The program did "freeze" ("Not Responding") for quite a few moments during the process though.
Perhaps your program cannot handle the larger TIFF src files over the network so it just gives up on the images all together?
Is there another way I can help you debug this?
Note- are you using TIF cube faces like my example?
Also- the tour and it's files are on a network drive, which *shouldn't* matter, but you never know?
EDIT: A smaller Panotour I have (on same network drive) with smaller equirectangular jpeg source panos imported fine. The program did "freeze" ("Not Responding") for quite a few moments during the process though.
Perhaps your program cannot handle the larger TIFF src files over the network so it just gives up on the images all together?
Found another Panotour of mine where only half the images imported correctly- those that were single Equirectangular TIFFs.. All panoramas that were cube faces did not import.
So it would seem that you haven't coded for situations where the Panotour pano image source files are cube faces.
So it would seem that you haven't coded for situations where the Panotour pano image source files are cube faces.
- Hopki
- Gnome
- Posts: 13004
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Again thanks for all the information.
We will need to look into this.
## EDIT ##
Can you provide a project file with at least one node and send it in so we have something to work with.
Regards,
Again thanks for all the information.
We will need to look into this.
## EDIT ##
Can you provide a project file with at least one node and send it in so we have something to work with.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13004
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Yes got that, thank you.
Thomas has had a look at your project, this is now fixed for the next release.
Regards,
Yes got that, thank you.
Thomas has had a look at your project, this is now fixed for the next release.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13004
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
HI,
This is working now in Pano2VR 6.1.5.
Regards,
This is working now in Pano2VR 6.1.5.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/