Pano side by side before-after

Q&A about the latest versions
Post Reply
bkiter
Posts: 90
Joined: Mon May 09, 2016 1:36 pm

Hello, is it possible to place 2 different panos side by side? Like splitting the view vertical in the middle, to the left pano a and pano b to the right?

Thank you.
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi,
Not at the moment and will require a player rewrite.
This is in the bug tracker so is on the developer's radar.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
User avatar
Tony
Posts: 1341
Joined: Mon Feb 15, 2010 6:54 am
Location: Adelaide, South Australia
Contact:

Hi,
Hello, is it possible to place 2 different panos side by side? Like splitting the view vertical in the middle, to the left pano a and pano b to the right?
I've just created this in Pano2VR 6.2.5 using a workflow from a V4 tutorial. https://p2vrtutorials.s3-ap-southeast-2 ... index.html

I've tested it in iPhone 11 Pro, iPad Air and Samsung S8 and it works fine.

image-previewgra14.jpg
image-previewgra14.jpg (466.93 KiB) Viewed 4445 times
iPhone 11 screen

If it's what you are after I can write up the workflow.

cheers,

Tony
Tony Redhead | Panoramic Photographer | mobile: +61438501002 | website: https://tonyredhead.com - https://redsquare.com | Pano2VR Tutorials: https://tonyredhead.com/pano2vr | instagram: https://www.instagram.com/tonyredhead/
bkiter
Posts: 90
Joined: Mon May 09, 2016 1:36 pm

Hello Tony,

Thank you! Yes, that's exactly the function I was looking for.

I would appreciate if you could write the workflow.

Best!
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi bkiter,
While searching for something else I came back to this post.
Your original request was to see a panorama split down the middle with one half being of one state say night and the other being another, say day.
I had it in my head you were referring to seeing one panorama split in two.

What Tony is showing is two different panoramas size by side which is not the same thing and no we can not do that just yet.
However, if you wanted what Tony shows you can do this quite easily using the Cardboard Template with Pano2VR pro.

You add the two panoramas to Pano2VR, Left and Right.
Then add an HTML5 output, under the HTML tab select the Cardboard template.

1.png
1.png (33.74 KiB) Viewed 4350 times

Then use the Edit Skin configuration button to open the templates properties and select Stereo Pairs.

2.png
2.png (43.31 KiB) Viewed 4350 times

When you create the project you will see a side by side showing the left and right panoramas.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
User avatar
Tony
Posts: 1341
Joined: Mon Feb 15, 2010 6:54 am
Location: Adelaide, South Australia
Contact:

Hi,

I have been working on a project where the two panoramas overlay each other but are split in the middle rather than appearing side by side. I'm having a bit of trouble with the CSS for the right hand side as I'm a bit rusty in that area.

Grab1.jpg
Grab1.jpg (378.59 KiB) Viewed 4334 times

Here's the current version online,

https://p2vrtutorials.s3-ap-southeast-2 ... xboth.html

You can see that the right hand side is slightly distorted as I've had to change the fov to get them to match up. When I get some time I'll revisit it.

cheers,

Tony
Tony Redhead | Panoramic Photographer | mobile: +61438501002 | website: https://tonyredhead.com - https://redsquare.com | Pano2VR Tutorials: https://tonyredhead.com/pano2vr | instagram: https://www.instagram.com/tonyredhead/
Idocio
Posts: 52
Joined: Wed Apr 15, 2020 9:26 pm

@Tony From the example you posted.
Would it be possible to do this with Pano2VR currently? (see link)
https://www.studiorunrun.com/pepemarin/ ... bpJCDXJIWI

As you can see, the central stripe can be moved to one side or the other, so that we can see one panorama or another.
jiminlai
Posts: 18
Joined: Tue Aug 25, 2009 12:12 pm

Hopki wrote: Mon Feb 24, 2020 3:16 pm Hi bkiter,
While searching for something else I came back to this post.
Your original request was to see a panorama split down the middle with one half being of one state say night and the other being another, say day.
I had it in my head you were referring to seeing one panorama split in two.

What Tony is showing is two different panoramas size by side which is not the same thing and no we can not do that just yet.
However, if you wanted what Tony shows you can do this quite easily using the Cardboard Template with Pano2VR pro.

You add the two panoramas to Pano2VR, Left and Right.
Then add an HTML5 output, under the HTML tab select the Cardboard template.


1.png


Then use the Edit Skin configuration button to open the templates properties and select Stereo Pairs.


2.png


When you create the project you will see a side by side showing the left and right panoramas.
Regards,
Hopki
Hi Hopki,

Thanks for this tip. My question is I'm trying to add a floorplan/map but I only want to show ONE floorplan on top of both screens, at the corner. How do I do this?
Currently the floorplan is showing inside both screens each with its own floorplan.

Thanks,
Jimin
Post Reply