BUG? Bottom LIMITS are off after 6.1.1 Update

[1uv3]

Hi,

Unless the limit settings have been intentionally changed, I think I have found a bug.

I have noticed that the bottom pan limits are off by about 35 degrees as the max is now 125 instead of the usual 90.

limits-off.jpg (213.29 KiB) Viewed 723 times

Thanks!

[1uv3]

After some further tinkering, you can actually pan to the bottom 160 degrees:

160-pan.jpg (174.74 KiB) Viewed 720 times

[Hopki]

Hi,
What your seeing is what you see in the viewer.

limits-off.jpg (219.56 KiB) Viewed 702 times

I hope this explains what is going on.
When looking down, depending on FoV you also see more or less, in this case, -125.00
Regards,
Hopki

[1uv3]

HAHA,

Yes, but does the view also go UPSIDE DOWN?
.

upside-dpown.jpg (552.98 KiB) Viewed 694 times

.
Check this out https://youtu.be/hMhC6jwkk2w

[Hopki]

Hi,
It does if you change the viewing limit, screenshot from Pano2VR 6.0

Screenshot 2019-10-30 at 08.48.43.png (28.76 KiB) Viewed 687 times

Here I have set the bottom to -760, makes for a rollercoaster ride, if your stomach can handle it.
But as it makes quite a few people feel a bit nauseous it's limited to -90 up and down.
Cheers,
Hopki