Hi,
For the quick shots I bought a Samsung gear 360 2017.
But I have issues to load the images into Pano2vr: The stitch isn't right: I keep seeing a bit of fish-eye images.
It stitch, but not it just don't fit the bounders of the too images.
Versie: 5.2.5 pro 64bit
Revisie: 15998/5.7.1
Build date: Jun 12 2018, 15:12:34
Importing Samsung gear 360 2017 jpg's
- Hopki
- Gnome
- Posts: 13034
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
One thing that is know with regards to the Gear VR is they include the levelling data but then straighten the image!
The end result is you get a very tilted and rolled image.
All you have to do is open the properties panel and at the bottom set pitch and roll to 0 then it will be as level as it would be from the camera.
Regards,
Hopki
One thing that is know with regards to the Gear VR is they include the levelling data but then straighten the image!
The end result is you get a very tilted and rolled image.
All you have to do is open the properties panel and at the bottom set pitch and roll to 0 then it will be as level as it would be from the camera.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/