Possible to change elevation of Auto Place hotspots?

Q&A about the latest versions
Post Reply
mbb
Posts: 276
Joined: Mon Oct 19, 2009 11:42 pm

Pano2VR V6.b2 Win10

I have a tour where I have used Auto Place for the hotspot targets, but I need to have the hotspots at different elevations. Is this possible? I thought I would be able to uncheck the Auto Place check box, edit the tilt and then re-check Auto Place (I can see that the new tilt value is retained but grayed out, so I thought it would still use the new value), but this has no effect.
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi,
In V6 beta 2 you can turn on altitude for the hotspots.
Go to Pano2VR settings/preferences => Advanced => Use altitude for ghost hotspots and auto-place hotspots
Of course you need altitude data in the image for this to work.
If yous image does not have altitude data this then yes unlock the point hotspot and move it up or down.
The lock will use the data in the image and snap the hotspot back.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi enertiv,
Can you send me one of your panos that does this?
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Post Reply