Architecture for people with disabilities

Panos/Objects created with Pano2VR/Object2VR/Pano2QTVR. You are welcome to post your recent creations here.
Post Reply
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

Hi!
I'm trying to make a manual for architects designing buildings for people with disabilities. This is a series of tours to different virtual objects.
Our team -the Laboratory «Sensor-Tech» -has been established to develop new technologies and products for people with hearing and vision impairments (including deaf-blind people). The question area of research and developments encompasses such scientific and technology directions as bioengineering, biotechnical systems, nanoelectronics and electrotechnology, information and communication systems, neurology and neurophysiology, genetics as well as some other areas.
I would be grateful for comments!

https://www.vr-azbuka.ru/scenes
Last edited by Sergey Burov on Fri Jan 15, 2021 2:31 pm, edited 7 times in total.
User avatar
360Texas
Moderator
Posts: 3684
Joined: Sat Sep 09, 2006 6:06 pm
Location: Fort Worth, Texas USA
Contact:

You wrote:
I'm trying to make a manual for architects designing buildings for people with disabilities.
Are you trying to create a paper book manual.

Please tell us more
Dave
Pano2VR Forum Global Moderator
Image
Visit 360texas.com
BParker
Posts: 78
Joined: Mon Jan 07, 2013 10:08 am
Location: Redlands, CA
Contact:

This is an interesting presentation that conveys a wealth of information to the viewer. Very nicely done! I hope you will consider doing an English language version at some point. There appeared to be a problem with one of the hot links though. In the initial view in the main hall, there is a long corridor with a hot link directly ahead of the viewer and a similar long corridor with a hot link directly behind. Both are labeled "corridor". The hot link for the second corridor seems to go to the same place as the hot link for the first corridor, even though they are in opposite directions. I hit one other navigation issue also. Using the "next panorama" button worked well until the outside "entrance" view was reached. Then it returned inside but all hot spots, buttons, and menus had gone away. I had to refresh the browser window to get them back. I was using Chrome. As I said, though, a very interesting presentation!
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

360Texas wrote: Mon Feb 04, 2019 8:50 pm You wrote:
I'm trying to make a manual for architects designing buildings for people with disabilities.
Are you trying to create a paper book manual.

Please tell us more
Interactive (Pano Tour) + paper book. It would be interesting to make a VR version. I'm confused-how to insert pictures... :(
Last edited by Sergey Burov on Tue Feb 05, 2019 10:59 am, edited 1 time in total.
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

BParker wrote: Tue Feb 05, 2019 7:40 am This is an interesting presentation that conveys a wealth of information to the viewer. Very nicely done! I hope you will consider doing an English language version at some point. There appeared to be a problem with one of the hot links though. In the initial view in the main hall, there is a long corridor with a hot link directly ahead of the viewer and a similar long corridor with a hot link directly behind. Both are labeled "corridor". The hot link for the second corridor seems to go to the same place as the hot link for the first corridor, even though they are in opposite directions. I hit one other navigation issue also. Using the "next panorama" button worked well until the outside "entrance" view was reached. Then it returned inside but all hot spots, buttons, and menus had gone away. I had to refresh the browser window to get them back. I was using Chrome. As I said, though, a very interesting presentation!
Thanks for the comments! Errors will be corrected. About the English translation -I think to translate partially, as these normative data are valid only for Russia and not interesting since other. The main my problem is how to make VR version in Pano2VR... :?:
duceduc
Posts: 43
Joined: Sun Dec 11, 2016 5:39 pm

I like the toilet shot. Did you used a 360 camera or dlsr? How did you hide camera since there was a mirror present?
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

It's not a real room, it's a 3D model!
duceduc
Posts: 43
Joined: Sun Dec 11, 2016 5:39 pm

Hahaha. I thought it looked surreal.
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

this is a new link: https://www.vr-azbuka.online/
Last edited by Sergey Burov on Thu Dec 24, 2020 8:33 am, edited 1 time in total.
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

My new panoture -"VR Expo"
https://www.vr-azbuka.online/
the.focus.farm
Posts: 11
Joined: Tue Nov 17, 2020 11:20 am
Location: Singapore

Hi,
Very interesting ! I especially like the aerial views. Very clever to add those static aerostats.

May I ask...
- What software did you use to create the environment ?
- How did You integrate the virtual contents into pano2vr ? I guess 360 views exported from your software ...

- Any experiment the "other way around" ? I mean have you ever tried to use 360 photographic image as an environment in some 3D file ?

I recently tried to integrate 360 photographic images as an environment for 3D files.
I used Blender to play around and loaded my 360 through a metallic sphere. No clue yet how to progress from there...

As 360 & pano2VR are based on a "static" view (the viewer basically stands where the camera was set), I am still wondering if there is a way to simulate movement inside the environment, along a 3D grid...

Cheers !
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

I use SketchUp + Lumion + Pano2VR = for me, this is the best option! :D
User avatar
Sergey Burov
Posts: 24
Joined: Thu Nov 16, 2017 3:04 pm
Location: Moscow, Russia
Contact:

the.focus.farm wrote: Sun Jan 03, 2021 7:22 am Hi,
Very interesting ! I especially like the aerial views. Very clever to add those static aerostats.

May I ask...
- What software did you use to create the environment ?
- How did You integrate the virtual contents into pano2vr ? I guess 360 views exported from your software ...

- Any experiment the "other way around" ? I mean have you ever tried to use 360 photographic image as an environment in some 3D file ?

I recently tried to integrate 360 photographic images as an environment for 3D files.
I used Blender to play around and loaded my 360 through a metallic sphere. No clue yet how to progress from there...

As 360 & pano2VR are based on a "static" view (the viewer basically stands where the camera was set), I am still wondering if there is a way to simulate movement inside the environment, along a 3D grid...

Cheers !
Hi! Have you tried Sketchfab?
the.focus.farm
Posts: 11
Joined: Tue Nov 17, 2020 11:20 am
Location: Singapore

Sketchfab. Ok ! I'll definitely try it out.
Thanks for the tip !
Post Reply