I have an issue with auto rotate when flash panos are viewed on systems with a slow broadband internet connection.
Q1) Is it possible to start the autorotate of a flash pano not immidiately while loading but only when the mov is fully loaded.
Q2) If this isn't possible is there an option to set a delay of a few seconds before the auto rotate starts ?
Thanks, Wim.
Start of auto rotate after fully loading
- Wim.Koornneef
- Posts: 218
- Joined: Wed Jan 03, 2007 4:11 pm
- Location: The Netherlands
- Contact:
- 360Texas
- Moderator
- Posts: 3684
- Joined: Sat Sep 09, 2006 6:06 pm
- Location: Fort Worth, Texas USA
- Contact:
Q1) Is it possible to start the autorotate of a flash pano not immidiately while loading but only when the mov is fully loaded.
A1) You may use a Flash Preloader. Essentially that is a transparent .png .jpg or splash image. It is something for the visitor to read or see [read give the visitor something to do] while pano's are downloaded in background. Click on the FLASH PRELOADER TAB find the "Imagefile". Mine is called "loading.png".
Q2) If this isn't possible is there an option to set a delay of a few seconds before the auto rotate starts ?
A2) On the FLASH TAB locate the Autorotate block in upper right corner. Check mark
'Enable' and Delay 5 seconds
'only in if in focus' and Speed 1 slowest
'Return to horizon' slider point mid center
This will turn this delay feature ON after 5 seconds of no rotation while mouse pointer is over panorama, and will rotate at the slowest speed. If the visitor has tilted down or up off the horizon... when autorotation begins it will gravitate back to the horizon. Visitor will never become lost. Great feature.
To see examples of these 2 features click on the red/white stars when visiting this page
http://360texas.com/virtualtour/texas/s ... change.htm
A1) You may use a Flash Preloader. Essentially that is a transparent .png .jpg or splash image. It is something for the visitor to read or see [read give the visitor something to do] while pano's are downloaded in background. Click on the FLASH PRELOADER TAB find the "Imagefile". Mine is called "loading.png".
Q2) If this isn't possible is there an option to set a delay of a few seconds before the auto rotate starts ?
A2) On the FLASH TAB locate the Autorotate block in upper right corner. Check mark
'Enable' and Delay 5 seconds
'only in if in focus' and Speed 1 slowest
'Return to horizon' slider point mid center
This will turn this delay feature ON after 5 seconds of no rotation while mouse pointer is over panorama, and will rotate at the slowest speed. If the visitor has tilted down or up off the horizon... when autorotation begins it will gravitate back to the horizon. Visitor will never become lost. Great feature.
To see examples of these 2 features click on the red/white stars when visiting this page
http://360texas.com/virtualtour/texas/s ... change.htm
- Wim.Koornneef
- Posts: 218
- Joined: Wed Jan 03, 2007 4:11 pm
- Location: The Netherlands
- Contact:
Hello Dave, Thanks for your response.
I looked at some of your flash panos panos and I noticed that almost all pano's are rotating while they are loading while the preloader image is visible. I tried it myself and my own flash panos suffer from the same behaviour
The option "only if in focus" blockes indeed rotation when the mouse is not in the image area but I am in doubt if this is the best solution.
I hope a new version of Flashpack will have an option to set a custom delay before autorotate starts and an option that will start autoration only when the pano is fully loaded.
Wim.
I looked at some of your flash panos panos and I noticed that almost all pano's are rotating while they are loading while the preloader image is visible. I tried it myself and my own flash panos suffer from the same behaviour
The option "only if in focus" blockes indeed rotation when the mouse is not in the image area but I am in doubt if this is the best solution.
I hope a new version of Flashpack will have an option to set a custom delay before autorotate starts and an option that will start autoration only when the pano is fully loaded.
Wim.
Your request came at the right moment. The brand new version 1.6.0 has this checkbox.
MfG, Thomas
- Wim.Koornneef
- Posts: 218
- Joined: Wed Jan 03, 2007 4:11 pm
- Location: The Netherlands
- Contact:
Hello Thomas,
This is what we call "Just in Time delivery"
Thanks
Regards, Wim.
This is what we call "Just in Time delivery"
Thanks
Regards, Wim.