Hello everybody
May be you can help me to solve my problem:
I have panoramic view (will attach a file)
Problem is that I cannot get 360 degrees QT VR
Just nowhere I can find information should original photo repeat the same view or it should be cropped somehow.
Please, help needed
Thank you
360 degrees panorama
The image shown is "faked" already (is it yours?) I would have thought if it was you would know this! If it's not - get permission before you land in trouble.
See result here (for learning purposes only)
Pano2QTVR had no problem dealing with the image (after it was put back to a 360 degree image)
Regards, Smooth
See result here (for learning purposes only)
Pano2QTVR had no problem dealing with the image (after it was put back to a 360 degree image)
Regards, Smooth
- 360Texas
- Moderator
- Posts: 3684
- Joined: Sat Sep 09, 2006 6:06 pm
- Location: Fort Worth, Texas USA
- Contact:
Shhh quietly spoken.. when you click on your 'click here' we get a 404 Err
But I think we all get the message... 'Don't Do' or we will hang your __ to the wall and let the folks over in _____ decide to what to do with your remains.
Arrrrg is that not considered proper ????
YESSSSSS
Hmmm I am feeling so much better after saying all this !
Good thing y'all are our friends !
But I think we all get the message... 'Don't Do' or we will hang your __ to the wall and let the folks over in _____ decide to what to do with your remains.
Arrrrg is that not considered proper ????
YESSSSSS
Hmmm I am feeling so much better after saying all this !
Good thing y'all are our friends !
-
- Posts: 9
- Joined: Mon May 07, 2007 10:26 am
Thank you, Smoothsmooth wrote:The image shown is "faked" already (is it yours?) I would have thought if it was you would know this! If it's not - get permission before you land in trouble.
Pano2QTVR had no problem dealing with the image (after it was put back to a 360 degree image)
Regards, Smooth
The picture is mine
And pano looks exactly what I need:)
Tell me, how did you do it?
How did you "put it back to 360 degree image"?
Please, help me:)
Best regards,
Free_lancer
-
- Posts: 9
- Joined: Mon May 07, 2007 10:26 am
You are so kind, but yes, I'm facing this problem - it's not alligning correctly - I can see the edges..smooth wrote:One "Arch" had been placed at one end (Fake) and needed to be removed (cropped). To make sure it was going to line up (on the wrap) I used Photoshop>Filters>Other>Offset>Horizontal (Wrap Around)
How did you find exact point to crop?
(I can see even color different...)
And also, did you change default settings when you did QTVR?
Mate, I looked at the image with my eyes and saw where the crop should be. I made a selection in Photoshop and copied the selection to a new layer. I then moved that layer with the opacity set to 60 or 70% and with the "Selection Tool" Selected I used the arrow key left and moved the image selection until it clearly matched up. Set the opacity back to 100% on that layer. I then flattened the image and cropped out the proper 360 degree image.
The Arch overlaid the Arch until there was on one.
There was some other little corrections but basically that was it.
The Quicktime movie settings were changed to my usual settings (roughly) Quality was 90, Static = Lossless, Movement = Max.
Regards, Smooth
The Arch overlaid the Arch until there was on one.
There was some other little corrections but basically that was it.
The Quicktime movie settings were changed to my usual settings (roughly) Quality was 90, Static = Lossless, Movement = Max.
Regards, Smooth
-
- Posts: 9
- Joined: Mon May 07, 2007 10:26 am
smooth wrote:The Quicktime movie settings were changed to my usual settings (roughly) Quality was 90, Static = Lossless, Movement = Max.
Smooth, thank's for your kind explanation, I've created correct 360degrees photo, but I guess I'm having problems with settings...
Look, what I get at the end:
http://uploadingit.com/files/32516/Corn ... 60_571.mov
Did you see this distortion? How to get out of that?
(I did it like in example on the official website)
-
- Posts: 9
- Joined: Mon May 07, 2007 10:26 am
Lets see:smooth wrote:Please supply "all of your steps" and I will see if I can spot your problem.
1. I drag and drop pano to the Pano2QTVR Gui
2. Project settings: Panorama - Equirectangular
3. Quick Time settings:
Cube face size: auto
Subdivision: 3x3
Quality: 90
Window size: 400 x 300 (I've tried different sizes)
Quality: Losseless (for motion and static)
Gamma: 0
Interpolator: spline 36
Viewing parameters: there is table
Pan Tilt FoV
Max 360 90 120
Start 0 15 70
Min 0 -90 5
And I've tried to change tilt from -80 till 80 and FoV - Max 100 Min -100 etc..
4. Then I press the button Create movie
That's it...
2: Your panorama is Cylindrical Not Equirectangular (if it was, it would be twice as wide as tall) "Exactly"
Regards, Smooth
http://www.smooth360.info
Regards, Smooth
http://www.smooth360.info
-
- Posts: 9
- Joined: Mon May 07, 2007 10:26 am
ups, yes, sorry, cylindrical.. by mistakesmooth wrote:2: Your panorama is Cylindrical Not Equirectangular (if it was, it would be twice as wide as tall) "Exactly"
but all other settings are the same as I wrote...
-
- Posts: 9
- Joined: Mon May 07, 2007 10:26 am
it works!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Free_lancer wrote:smooth wrote:2: Your panorama is Cylindrical Not Equirectangular (if it was, it would be twice as wide as tall) "Exactly"