Multirow ObjectVR - but how?

Q&A about the latest versions
PhotoSpherix
Posts: 294
Joined: Wed Oct 22, 2008 9:45 pm
Location: Beech Grove
Contact:

Fri Feb 20, 2009 1:00 pm

I can not think of a great way but one that will get you close is to use a piece of string to stay at the same radius from the center of the rotating turntable. It is not to difficult to do in set up, but it is hard to do when you are actually shooting. The sting gets in the way.

Use a thumbtack and a 4ft piece of string. Tack the string to the center of the turntable and tie the other end to an area near the mounting screw for the camera. This way the camera stays the same distance from the object. Now carefully find a way to move the camera and tripod to different locations around that radius. by moving the tripod in and up. You will need to re aim the camera to the thumbtack each time that you move in and up. Easy without an object on the turntable, but real hard with an object.
PhotoSpherix
Starting a revolution in Photography
360 Product Photography
digimg02
Posts: 17
Joined: Wed Feb 18, 2009 2:42 am

Tue Feb 24, 2009 11:34 pm

So simple, I like it. I was hoping to not have to run around with a tape measure and a piece of paper.
User avatar
360Texas
Moderator
Posts: 3506
Joined: Sat Sep 09, 2006 6:06 pm
Location: Fort Worth, Texas USA
Contact:

Wed Feb 25, 2009 2:55 pm

5 or 6 years ago a Canadian friend of mine used "thin transparent fishing line" as a guide wire to object model a small single engine aircraft. The transparent fishing line works well as it blends with the ground... and is easy to clone out.
Dave
Pano2VR Forum Global Moderator
Image
Visit 360texas.com
pbeddis
Posts: 3
Joined: Tue Jul 07, 2009 12:47 am

Tue Jul 07, 2009 1:18 am

Hi guys!

I thought it might be worth mentioning the equipment we use for multi-row objects... http://www.virtuall.cz/en/category/foto ... rview/arm/.

Hope it helps.
Paul
SpinMe.co.uk
dancoss
Posts: 1
Joined: Thu Dec 03, 2015 1:53 pm

Mon Dec 21, 2015 3:27 pm

Hi does anybody have a system for aligning objects while shooting a multi state 360º ( for instance three objects different material )

Thanks

Merry Xmas
User avatar
Hopki
Gnome
Posts: 10853
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Mon Dec 21, 2015 9:23 pm

Hi,
You could set up lasers or even simpler use objects mark the location before you move the object.
Regards,
Hopki
Hopki
Garden Gnome Software Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
User avatar
Svendus
Posts: 685
Joined: Sun Jan 06, 2008 11:03 am
Location: Sweden
Contact:

Mon Dec 21, 2015 11:12 pm

yes a cheap laser pointer on a tripod works fine
Image Image
Post Reply