"Changeable" portions within linked panos

[Brett Horton]

Thanks for your help!

[Hopki]

Hi
Enter the following the in the Information Field in the User Data window:

<img src="picture.jpg" hspace="0" vspace="0" width="200" height="150">

The picture should be in the same directory as the pano. In this case picture.jpg.

Using the Test.ggsk file this should work, I even tested it again just encase I was getting something wrong.

But all works fine.
Regards
Hopki

[Brett Horton]

Still not working!!!!!!!!!!!!!!!!!!!!
I get the box in the middle of the screen with a slightly reduced alpha with $ui at the top middle. Click on and it goes away obviously. But no picture, I renamed a small jpg, to "picture.jpg" placed in the same folder as the original pano. but still no joy....placed the text line into the "information" field on the user data etc.....

[Hopki]

OK
I will put a complete working project in a zip and give you the link to it.
It’s to late now, as I need to be up early, but I will endeavour to do it tomorrow evenining if that’s ok.

You Will get this working I promise

Hopki

[Brett Horton]

Again thanks for your time!
The whole process seems easy, but apparently I am missing something, surely basic

[Hopki]

Hi
Click Here

This demo project has two images externally loaded 1x jpg and 1 x png using place holders and User Data Boxes.

Open the project file, it will complain but when it opens Click on Open Output File to see the swf with the images.


regards
Hopki

[Brett Horton]

Thanks!
I have opened all the files looked at them, nothing surprised me, See nothing that I am doing wrong, but....... yours works...... mine does not!!!........

I am going to start a new file structure and start fresh, sometimes that works. I will let you know!

[Brett Horton]

This is kicking my A$$!!!!
I have followed your EXACT template, created my own in a new folder, does not work.....
I can changed your "tea pot" pictures with my own, add new ones in YOUR file, but CANNOT reproduce the results on my own!?????

[Hopki]

PM me and send me a link to a project file like the one I sent you.
It must be something silly.
Your useing 2.2.2 ant you?

[Brett Horton]

OK, Sorry it took so long to get back to you!!!
Below is attached the 5000th attempt (failed attempt)

See if you can have a go at it!!
It uses your "test.ggsk" template.

[Hopki]

Hi I will give it a go tomorrow as its midnight now.
Regards
Hopki

[Hopki]

Hi
All works
The complete project and skin is in the zip.

All is good, I made another skin with just the text box.

I have put in a couple of bits of code that work in the User Data Fields.

Have a look and make sure that Word Wrap is ticked in the text Box.
Also check your place holders, try more than one, $us, $ui etc in the skin text box.
Other than this I have no idea why you can not get it working
The File

Regards
Hopki

[Brett Horton]

Even the one you sent to me does not work!!!!

I give up.............
Do not know what to do.
The first one you sent me works fine, the one you just sent does not.... I assume the 7_out.swf file functions correctly on your machine.....

Might just have to change plans with our client...

Thanks for your help...

[Hopki]

Hi
I just downloaded the file, unzipped it and away it went
Can someone else download the zip please, unzip to folder and open the Pano2VR project file.
Opening the pano you should see three of the same pictures.

Brett what is your location?

Hopki

[360Texas]

I downloaded the test.zip. I unziped it. Here is what I found

New folder /temp2
7.jpg
7p2vr
7_out.swf
picture.png
test.ggks

I would search for a folder called /temp2

Clicked on the 7_out.swf
Looked at the panorama and 3 static [stuck in the upper left corner of the viewer] fairway tags each saying 357 yards Par 4. Tried zooming in/out but they remain static.

One thing I noticed was that the skin was pathed to your hard drive. In the skin editor there are 3 [T] text's in the Tree. Text 1, 2, 3. In the skin grid there is $ui, $us, $uc. ID's 1, 2, 3.