How to Place a "ticker"

Special forum to share and discuss skins for Pano2VR and Object2VR
Post Reply
TWiegand
Posts: 20
Joined: Thu Aug 22, 2013 3:08 pm

Hi, I'm working on a Panorama and want to place a (text) Ticker on a wall.
But the ticker must stay in the correct perspective if i move the Pano.
So my Question "how to do"???

THX
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi,
If you are using V7 you can use the pinned web element with an iframe.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
TWiegand
Posts: 20
Joined: Thu Aug 22, 2013 3:08 pm

THX, but i am using still V6. There is no chance?

in V7. With the pinned Element, the iFrame stays in its correkt Perspektiv, corresponding to the Pano?
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Use a text box and a 3D distorted hotspot template.
This will work as long as you do not need to much distortion.
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
TWiegand
Posts: 20
Joined: Thu Aug 22, 2013 3:08 pm

Hi, i checked the 3D distorded HS Image, but there are some "Problems".
I have to put the text on the wall, an the text should move with the wall
in the correct perspective. With the 3D distorded HS Image, the text is on the floor.
I think this is part of the JS. But i realy do not understand the code, where i can fix the
text in the correct Position.

Becaus i need the text in two languages and it has to move (ticker) i can not
map it an the wall with a patch.

It would be very fine, if you have a solution for me.
THX
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi,
You can only "pin" a text box to a distorted Point Hotspot Template.
You can use CSS to adjust the position, please see: viewtopic.php?f=13&t=15551
This project uses similar but uses CSS to "flatten" the image to the floor.

If you can not get it to distort the way you want then I would suggest is look at Pano2VR 7 beta and giving the pinned web element a try, you can test it in trial mode, if it does what you need, then maybe upgrade.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
TWiegand
Posts: 20
Joined: Thu Aug 22, 2013 3:08 pm

Thx, I check it!
Post Reply