Hi
I'm trying to build a pan controller with the 4 buttons aligned as a cakeform like in the screenshot below
Inside the screenshot there are the 4 pan buttons and the red line is the controller marking the pan left button... the actual grey or yellow part is an svg... the tree structure of my buttons is shown in the image below
The problem is now that the hover or the click on the element overlaps the other buttons, so this solution would not work
Is there someone who had a similar problem to solve this design problem?
Thank you very much
Hover and click on buttons in round cakeform (Missing polygon button)
- Hopki
- Gnome
- Posts: 13022
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Working project attached.
See if you can work it out, but as a hint, it uses CSS Radius for the masking container, which is then rotated.
Then it's just a case of adjusting the angles and position of rectangles.
Regards,
Working project attached.
See if you can work it out, but as a hint, it uses CSS Radius for the masking container, which is then rotated.
Then it's just a case of adjusting the angles and position of rectangles.
Regards,
- Attachments
-
- nav.zip
- (13.96 KiB) Downloaded 135 times
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13022
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Nice
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/