Hi
Just thought you would like to see my first outing with the new skin commands.
http://www.hopkimedia.co.uk/KSP%20Wareh ... e%201.html
The arrows are point hotspots, and are pointed to the direction you are going while the hot spots in the floor plan point to set positions.
It did take some doing to get it all to work but very pleased with the result. The radar width also corresponds with you FOV, well all most.
Also did I say Thomas, TOP MAN.
Hopki
My First 2.2 beta 4
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Up date
The only thing I was not happy with in the above skin was the way I had to open and close the Help and Floor Plan pages. I wanted to use the scale commands as I think it looks better than just pages appearing and disappearing. So both pages are set to scale 0/0, when the appropriate button is clicked the command set element scale 1/1 is used so the page grows, scales up in the window, cool.
I then had to put a set element scale command to scale the other window back down, so in the floor plan button there is the command, set element scale 0/0 for the help page. A similar command was put in the help page button to scale down the floor plan.
Problem, when one page was opened then the other with out closing the first the desired effect was seen, the firs page scaled down and the new page scaled up. The problem is when clicking to open the first page agene, nothing happens. The toggle command can not detect if the page has already been scaled down by another command. This means you have to click the button twice.
In the end I used a set element scale command and used a close button to scale the page down to 0/0.
What I need is the toggle commands to know what state the elements are so they don not toggle some thing that has already be done.
Any thoughts?
Regards
Hopki
The only thing I was not happy with in the above skin was the way I had to open and close the Help and Floor Plan pages. I wanted to use the scale commands as I think it looks better than just pages appearing and disappearing. So both pages are set to scale 0/0, when the appropriate button is clicked the command set element scale 1/1 is used so the page grows, scales up in the window, cool.
I then had to put a set element scale command to scale the other window back down, so in the floor plan button there is the command, set element scale 0/0 for the help page. A similar command was put in the help page button to scale down the floor plan.
Problem, when one page was opened then the other with out closing the first the desired effect was seen, the firs page scaled down and the new page scaled up. The problem is when clicking to open the first page agene, nothing happens. The toggle command can not detect if the page has already been scaled down by another command. This means you have to click the button twice.
In the end I used a set element scale command and used a close button to scale the page down to 0/0.
What I need is the toggle commands to know what state the elements are so they don not toggle some thing that has already be done.
Any thoughts?
Regards
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
there is my download site of same function SOURCE file :
http://gardengnomesoftware.com/forum/vi ... =13&t=1568
http://gardengnomesoftware.com/forum/vi ... =13&t=1568
-
- Posts: 15
- Joined: Sat Sep 09, 2006 3:20 am
- Location: Canyon Country, California, USA
The RAR on that page is 404. Has it been removed from the server or is there a typo in http://cq.panomap.cn/gch/firehell/mynew ... thtest.rar?firehell wrote:there is my download site of same function SOURCE file :
http://gardengnomesoftware.com/forum/vi ... =13&t=1568
- Hopki
- Gnome
- Posts: 13029
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Pat
I have attached the ggsk file from my pano for you; just unzip it and it’s good to go.
Hope it helps
Hopki
I have attached the ggsk file from my pano for you; just unzip it and it’s good to go.
Hope it helps
Hopki
- Attachments
-
- Floor Plan.ZIP
- Up dated to work with Pano2VR 2.2
- (185.94 KiB) Downloaded 492 times
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/