Floor plan displayed as pattern

Special forum to share and discuss skins for Pano2VR and Object2VR
Post Reply
zogof2x
Posts: 5
Joined: Fri Jan 22, 2021 1:25 pm

When I choose the floorplan in the skin editor it shows up as a pattern. When exporting the tour all is fine. But it is quite hard to set the map pins. See screenshots...

Can anyone help?

Thanks a lot!
Kilian.
Attachments
Bildschirmfoto 2021-02-08 um 22.29.14.png
Bildschirmfoto 2021-02-08 um 22.29.14.png (104.48 KiB) Viewed 1311 times
Bildschirmfoto 2021-02-08 um 22.26.43.png
Bildschirmfoto 2021-02-08 um 22.26.43.png (159.55 KiB) Viewed 1311 times
User avatar
Hopki
Gnome
Posts: 13004
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi Kilian,
You don't drag nodes into the Map Element.
The workflow is to add the floorplan to the Tour Map. Then drag nodes from the Tour Browser into the Tour Map and link.
Then add the Map Element in the skin, select your Floorplan and you will see all the map pins, etc.
Please see: https://ggnome.com/doc/panel-tour-map/
Also worth watching is the three webinars about Maps, go to this link: https://ggnome.com/webinars/
Select the Floor PLans filter, If you want to master the Maps and Floor PLans then I would start with the 101 video then go to Parts one, two, and three.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
zogof2x
Posts: 5
Joined: Fri Jan 22, 2021 1:25 pm

Hi,
thank you a lot for the fast reply.
I tried to do it like in the tutorial "Skin Editor Component -- Map Pin with Radar -- Pano2VR pro" because I do like the nice simple markers from the skin.
But did not get it working.

Here is the tour in case you will take a look: https://www.zagel.photo/output/index.html

And: I absolutere enjoy Pano2Vr. Used it several years ago. Tried krpano instead but its pretty frustrating.

Thanks!
zogof2x
Posts: 5
Joined: Fri Jan 22, 2021 1:25 pm

I did some try (and error) and did get it working. Not perfect but on the right way I think.
Doing the map in the Tour browser is easier, but I do not like the design of the pins (the red ones)

Thanks for your help!
Post Reply