Object2VR - rotation speed

Special forum to share and discuss skins for Pano2VR and Object2VR
Post Reply
User avatar
stalwart
Posts: 651
Joined: Thu Oct 02, 2008 11:52 am

I'm working on this project integrating Object2VR gallery pieces into the gallery tour: https://www.360imagery.co.uk/draft/carb ... index.html

Re: the Object2VR elements, the client want's the rotation speed set to change image every 4 seconds. I've set the Auto Play speed ot 0.01 (what's that "0.01" in relation to?) with a delay of 3.0 seconds. I *think* this is the slowest I can set but the client still thinks this is too fast. How can I set the rotation speed to be a specific set of seconds?

TIA

Stu
User avatar
Hopki
Gnome
Posts: 13005
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Hi Stu,
If you use a button to start the auto-rotate you can set speeds very low.
Example Speed: 0.00001 if you really wanted.
I did note you can only set 0.01 in the project file so just use the skin to start it with either Viewer Init or Loaded, then Auto Rotate Start, 0.005.
I have added this to the bug tracker as the set values should be consistent in the project file and the skin.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Post Reply