Problem with custom skin

Special forum to share and discuss skins for Pano2VR and Object2VR
Post Reply
Siimuke
Posts: 1
Joined: Wed Apr 24, 2019 5:28 pm

Problem with custom skin

Post by Siimuke » Fri Jun 28, 2019 6:37 pm

Hello!

Im having trouble adding transition time for rectangle size and scale at the same time. If only scale has transition time it works well but when I add size aswell it makes the transition time instant. Am I missing something or you can't use them at the same time?

Best

Siim

User avatar
soulbrother
Posts: 351
Joined: Tue Apr 08, 2008 7:01 pm
Location: München
Contact:

Re: Problem with custom skin

Post by soulbrother » Sat Jun 29, 2019 7:28 am

What version of pano2vr do you use.
Did you try an update or upgrade?
I had the same problem, with an older version (but I don´t remember exactly my version of that time).

User avatar
Hopki
Gnome
Posts: 9447
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK
Contact:

Re: Problem with custom skin

Post by Hopki » Mon Jul 01, 2019 11:27 am

Hi Guys,
For transitions to work you must set this in all logic blocks.

Example, you want to "fade the alpha" but scale up without seeing the movement of a rectangle, so just show the new size.
What you need to do is in both Alpha and Scaling logic blocks is set the transitions.
For the Alpha, you set a time, say 0.5 seconds to fade in or out but the scale would need a transition of 0.00.

If you simply di not use transition for the scale this stops transition for the Alpha.
So in short, if one logic block has a transition then any other logic block you are using will need it as well.
Regards,
Hopki

Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests