Problem with custom skin

Special forum to share and discuss skins for Pano2VR and Object2VR
Post Reply
Posts: 2
Joined: Wed Apr 24, 2019 5:28 pm

Fri Jun 28, 2019 6:37 pm


Im having trouble adding transition time for rectangle size and scale at the same time. If only scale has transition time it works well but when I add size aswell it makes the transition time instant. Am I missing something or you can't use them at the same time?


User avatar
Posts: 434
Joined: Tue Apr 08, 2008 7:01 pm
Location: München

Sat Jun 29, 2019 7:28 am

What version of pano2vr do you use.
Did you try an update or upgrade?
I had the same problem, with an older version (but I don´t remember exactly my version of that time).
User avatar
Posts: 10833
Joined: Thu Jan 10, 2008 3:16 pm
Location: Layer de la Haye, Essex UK

Mon Jul 01, 2019 11:27 am

Hi Guys,
For transitions to work you must set this in all logic blocks.

Example, you want to "fade the alpha" but scale up without seeing the movement of a rectangle, so just show the new size.
What you need to do is in both Alpha and Scaling logic blocks is set the transitions.
For the Alpha, you set a time, say 0.5 seconds to fade in or out but the scale would need a transition of 0.00.

If you simply di not use transition for the scale this stops transition for the Alpha.
So in short, if one logic block has a transition then any other logic block you are using will need it as well.
Garden Gnome Software Support
If you send an e-mail to support please send a link to the forum post for reference.
Post Reply