Hi,
Is it possible to manage thumbnails so that I delete one I don't want in component but want it with hotspot or menu access ?
Thanks
Philippe
Manage thumbnails...
- Hopki
- Gnome
- Posts: 13025
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Philippe,
You can use tags, tag each pano you want to see in the thumbnail menu.
Then set this tag in the thumbnail menu cloner.
Only the panos that have the tag will show.
Regards,
You can use tags, tag each pano you want to see in the thumbnail menu.
Then set this tag in the thumbnail menu cloner.
Only the panos that have the tag will show.
Regards,
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
- Hopki
- Gnome
- Posts: 13025
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi Philippe,
You can even use a button with the action:
mouse click, set value, "tag" to the cloner.
This means you can have buttons to change which thumbnails appear in the thumbnail menu.
Example of use would be a multi story building. as you select 1st floor you see all 1st floor panos.
Select ground floor and you see all ground floor panos.
Regards,
Hopki
You can even use a button with the action:
mouse click, set value, "tag" to the cloner.
This means you can have buttons to change which thumbnails appear in the thumbnail menu.
Example of use would be a multi story building. as you select 1st floor you see all 1st floor panos.
Select ground floor and you see all ground floor panos.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Hi all,
been trying this today with no luck (!). I want to show only certain thumbnails in the clone thumb slider using tags (show only hotel rooms, not the en suites). What's the "source" I enter? I've set the tag name "thumb_slider" in the .p2vr file.....
Here's the skin, if that helps:
http://www.360imagery.co.uk/temp/tags.ggsk
Stu
been trying this today with no luck (!). I want to show only certain thumbnails in the clone thumb slider using tags (show only hotel rooms, not the en suites). What's the "source" I enter? I've set the tag name "thumb_slider" in the .p2vr file.....
Here's the skin, if that helps:
http://www.360imagery.co.uk/temp/tags.ggsk
Stu
Hi Philippe.
That action will work with the drop-down menu as it has a "mouse click" call-to-action. For the thumbnail slider, it loads on start up:
http://www.360imagery.co.uk/portfolio/l ... dge-hotel/
...so I thought the "init" action would work.....but it doesn't....
Stu
- Hopki
- Gnome
- Posts: 13025
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Attached project
The input images have Tags as found in the user data.
RED, GREEN, BLUE.
In the skin there are test boxes with set value actions to set the tag to the thumbnail cloner.
The ALL button removes the tag so it shows all thumbnails.
Cheers,
Hopki
The input images have Tags as found in the user data.
RED, GREEN, BLUE.
In the skin there are test boxes with set value actions to set the tag to the thumbnail cloner.
The ALL button removes the tag so it shows all thumbnails.
Cheers,
Hopki
- Attachments
-
- stu.zip
- (733.81 KiB) Downloaded 388 times
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Thanks Martin (as always!).
I'll give it a try later....
Stu
Hi Martin,
This works a treat - thanks. How would I code it so on tour launch some panos are permanently excluded from the thumb cloner completely (for example, en suites or multiple scenes in a single bedroom. I only want one thumbnail for each room in the thumbnail slider....).
Stu
- Hopki
- Gnome
- Posts: 13025
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
HI Stu,
Just use tags.
Example, tag all nodes that you want to show with "Disp".
Then in the cloner input "Disp".
On open it will only display these nodes.
The buttons with the set value actions will show nodes with the selected tags but the "blank" one in my example would have a set value to "Disp".
Cheers,
Hopki
Just use tags.
Example, tag all nodes that you want to show with "Disp".
Then in the cloner input "Disp".
On open it will only display these nodes.
The buttons with the set value actions will show nodes with the selected tags but the "blank" one in my example would have a set value to "Disp".
Cheers,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
Thanks - just perfect - works a treat!!:Hopki wrote: ↑Thu Sep 14, 2017 3:00 pm HI Stu,
Just use tags.
Example, tag all nodes that you want to show with "Disp".
Then in the cloner input "Disp".
On open it will only display these nodes.
The buttons with the set value actions will show nodes with the selected tags but the "blank" one in my example would have a set value to "Disp".
Cheers,
Hopki
www.360imagery.co.uk/virtualtour/hospit ... racenshead
...and is mobile responsive too!
thanks - made my day!
Stu
what if the menu (red, green, blue) was loaded from a cloner using a table?
So I have a table menu that uses a table instead of nodes
tag floor1 title floor 1
tag floor2 title floor 2
in "red" (but in my case it would be the menu cloner)
action
source: on mouse click
action: set value
parameters: $(ctitle) <<<<----?????
target: thumbnail cloner
So I have a table menu that uses a table instead of nodes
tag floor1 title floor 1
tag floor2 title floor 2
in "red" (but in my case it would be the menu cloner)
action
source: on mouse click
action: set value
parameters: $(ctitle) <<<<----?????
target: thumbnail cloner
- Hopki
- Gnome
- Posts: 13025
- Joined: Thu Jan 10, 2008 3:16 pm
- Location: Layer de la Haye, Essex UK
- Contact:
Hi,
Then it would work the same as the component: Thumbnail Menu with Categories
Add this component and see how it works.
The only difference is a thumbnail menu is horizontal.
Regards,
Hopki
Then it would work the same as the component: Thumbnail Menu with Categories
Add this component and see how it works.
The only difference is a thumbnail menu is horizontal.
Regards,
Hopki
Garden Gnome Support
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/
If you send an e-mail to support please send a link to the forum post for reference.
support@ggnome.com
https://ggnome.com/wiki/documentation/