Actually, I did set columns:7, but after I load all 7 images, there is only 1 input image. I dragged 6 spared images to the input images, then created the flash. In the flash, I saw my object is not centered during the rotation. Mainly because I rotate my cup by hand and I take each photo with offse...

I am new to Object2VR. Looks like it doesn't need any stitch application like ptgui, all the photos can be input directly to Objct2VR. I tried taking photos (6) of my cup, then, I rotate my cup, take another, ...., After I input them to Object2VR, it only accept the first photo, the rest all become ...

DemonDuck, thanks for the reply. I saw some sudden change of the snow and tree when I zoom in/out in your panorama too. How did you fix that? I tried several parameters in pano2vr, it dosn't work, I used zoom in/out button I made on the pano to do the zoom, slower response than mouse wheel, less obv...

I notice when I zoom in/out the panorama, I see sudden change on a small portion of the edge of the wall, it seems to protuding when zoom in and sinking-in when zoom out. The fast I do, themore protuding/sinking it does. Then, after I stop zooming, it recovers to the normal image. I did screen print...

I tried what the tread said. But, it doesn't seem to take the actions of "Loaded", The loaded actions suppose to redisplay the radar beam in the correct angle, but instead, I don't see the radar beam once I click another panorama button in the map. Here is my steps: mouse click: set elemen...

when I switch from one hotspot to another hotspot, the radar beam in the new hotspot does not drop the angle of the radar beam from previous hotspot immediately, it then quickly swiches to the angle of the new hotspot radar beam. Is there a way to set the radar beam angle of the new hotspot after sw...

You are right on set the border to 0. Previously I did scaling but not set the border to 0. Now it works. thanks.

Ok. after I did more research, I found one way to solve it is to create a long image e.g.2600X100 pixel to cover the bottom of the screen, so that it will not running short in full screen version. 2600X100 image in jpg is not much, about 15k. I tried using 1X100 pixel, then scale the 1X100 rectangle...

Nicely done virtual tour. How did you do the navigation panel on the bottom so that it changes the size to fit the window as it resizes, especially, when it goes to full size screen?

This might be a simple question. I didn't find the answer yet. I have a rectangle horizontally covers the bottom of the screen completely. It works in 800x600 because I set the rectangle width to 800 and height to 600. But, if I switch to full screen, the rectangle does not stretch horizontally to c...

This is very helpful. I would like to give it try as soon as I get my lens. Thanks.

spherical 2:1 dimensioned image so, the procedure is after i take panoramic shots with my 10.5mm full frame fisheye, PtGui takes in the jpeg or raw image from the camera, and output to 2:1 equirectangle image (is that what you meant by "spherical 2:1 dimensioned image."?) Then Pano2VR tak...

just posted it, couldn't find it, so I am posting again. Any recent updates to support spherical panoramic format? Or is there a way to get around with the latest release?

I see pano2VR doesn't handle spherical panorama on the pno2vr product page. But still want to push my luck. Maybe the new version support spherical panorama? Or maybe there is another way to get around? I use 10.5mm fisheye, I would like try pano2VR if it can work with spherical panoramic format. an...